Equipment

Flash Grenade Pouch from Helikon-Tex is an exceptional design crafted for carrying flash grenades or similar-sized items. This is a box-shaped pouch that effortlessly accommodates most standard grenades of this type. Equipped with a flap closure, the Flash Grenade Pouch allows for easy height adjustment according to the user's needs.

M-Tac Suharka Pouch Gen.3 is a modular utility pouch for organising small equipment on a compatible carry setup. The utility-pouch format is intended for small equipment that benefits from a dedicated storage point.

M-Tac Cuirass QRS Front Magazine Panel is a modular accessory intended to extend or configure compatible load-carrying equipment. It uses Cordura 500D, has a capacity of 3 magazines and weighs approx. 100 g.

MG Operator patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

M-Tac Ace of Spades 3D PVC Patch is a removable hook-and-loop patch measuring 50 × 60 mm. Material: PVC.

M-Tac Valknut Patch 3D PVC is a removable hook-and-loop patch measuring 50 × 50 mm. Material: Rubber.

The Skeletonized Cummerbund Wide by Direct Action is an extended version of a minimalist and lightweight cummerbund designed for plate carrier vests. It serves as an excellent companion for all Direct Action® platforms, including the BEARCAT® Ultralight Plate Carrier. This cummerbund is crafted from flexible nylon, allowing not only the carriage of flat items but also soft and hard ballistic protection.

The Direct Action Skeletonized Triple 223 Flap is an advanced, skeletonized load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This innovative panel allows for carrying three magazines for M4/AR15 rifles. The magazines are secured with elastic bungee cord retainers, ensuring secure and quick access to ammunition. Thanks to its skeletal construction, the flap is not only minimalist but also one of the lightest options available on the market. It excels in situations where every gram of equipment matters.

The Skeletonized Shotgun Shell Flap from Direct Action is an advanced skeletonized panel with pouches designed specifically for BEARCAT vests and the SPITFIRE system. This flap allows you to carry three magazines for M4/A15 rifles and up to 15 shotgun shells. The top of the magazines is secured by elastic bungee cord straps. Thanks to its skeletal construction, this flap not only features a minimalist design but is also one of the lightest panels on the market.

The Skeletonized Rifle Pouch by Direct Action is a partially rigid rifle pouch that provides quick access to magazines. It is equipped with a non-slip Hypalon® panel that effectively prevents magazines from falling out. Thanks to its partially adjustable size, this pouch can be used with AR, AK, and SR platforms.

The Helikon-Tex Tourniquet Pouch is a practical pocket designed for carrying a compression bandage. It allows for easy transport of standard compression bands while ensuring their stability. The bandage is firmly secured thanks to a durable Velcro panel located inside this military pocket. The Tourniquet Pouch can be effortlessly attached to a belt or a modular system, both horizontally and vertically.

The Low Profile Dump Pouch® by Direct Action is an excellent solution for storing both empty magazines and a variety of items found during your missions. This flat and compact pouch is easy to attach to your belt and ready for immediate use. Inside the pouch, you can easily fit several rifle or pistol magazines, and even a full-sized handgun. Thanks to the reinforced, rubberized handle, using it is remarkably straightforward, even without the need to glance at the pouch.

The Helikon-Tex Universal Pouch is a practical tactical pouch designed for carrying items such as rifle magazines, compression bandages, dressings, and other objects of similar dimensions. The pouch is equipped with a hook-and-loop panel for mounting and can be attached to both a tactical vest and a belt with hook-and-loop fasteners.

M-Tac Cobra Buckle Tactical Belt is a load-bearing tactical belt for attaching compatible pouches and field equipment. It uses double-layer nylon webbing and weighs 180 g.

The Guardian Dangler from Helikon-Tex is a spacious pouch designed for storing tactical accessories. It serves as an excellent addition that can be attached to the Guardian Plate Carrier vest. The Dangler provides additional storage space for essential accessories, allowing you to stow extra supplies, a medical kit, or necessary tools.

The Skeletonized Quad SMG Flap Panel from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This flap panel has been designed for carrying four magazines for submachine guns such as MP5 and Scorpion Evo. The magazines are securely held in place by elastic bungee cord straps, allowing for quick access to ammunition.

The Guardian Kangaroo Flap Guardian Kangaroo Flap maintains a simple design, reducing the overall weight of the setup. panel designed for carrying tactical accessories, perfectly suited for plate carriers. It features a substantial surface covered with hook-and-loop fasteners, allowing for easy attachment to the vest. As a result, you gain more options for organizing the front of your Guardian Plate Carrier, using both the Law Enforcement Insert panel and elements of the Competition system.

The Skeletonized Triple 308 Flap from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This load-bearing panel is designed to carry three SR (.308WIN) magazines, securely held in place by elastic bungee cord straps. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

The Skeletonized Triple Rifle Flap from Direct Action is an advanced skeletal flap designed for plate carriers from the BEARCAT® series and the SPITFIRE® system. With fully adjustable surface-mounted pockets, the flap allows for carrying three rifle magazines, including M4/AR15, AK, and SR models. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

The Skeletonized Comms Wings Set by Direct Action is a kit of two side panels designed specifically for plate carriers, intended for carrying most models of individual radio stations, including AN/PRC-148 and AN/PRC-152. These panels feature adjustable height, allowing for a perfect fit with various radio configurations, both with and without batteries.

The Compact Med Pouch Horizontal by Direct Action is a compact tool designed for carrying essential pre-medical first aid supplies with a vertical mounting system in mind. Constructed from durable Cordura® 500D, 210D nylon, and laser-cut laminate, this pouch has been specifically engineered for attachment to the rear of a belt. It pairs perfectly with the HORNET® Skeletonized Belt Sleeve, but can also be attached to any MOLLE/PALS compatible platform or a belt with a width of up to 45mm using the practical paracord loops.

Helikon's "Plug & Play" patch is a funny reference to the shooting subject. Patch shows a smiling red-haired and green-eyed woman holding a gun in her hand. In the teeth a four-leaf clover for good luck. A green baseball cap on the head. The woman is wearing a frayed khaki T-shirt. The Helikon-Tex brand symbol, i.e. a green chameleon, on the arm, the brand name embossed on the forearm.

The funny patch "We can share" by Helikon is taking military matter with a grain of salt. The edge of the circular patch says, “Yes! We CAN share… Which piece for U? ”. Although seemingly innocent, in combination with the detailed graphics of the hand grenade, it takes on a completely different meaning. The patch is available in gray and U.S.Brown colors.

Mil-Spec Monkey Monkey Head 2 Inch Square Leather Morale Patch is a morale patch by Mil-Spec Monkey with hook backing for compatible loop panels. Angry Monkey Head stencil logo on leather in a compact square format. It measures approximately 2 x 2 in (5.1 x 5.1 cm) and can be mounted on compatible clothing, packs and equipment.

Mil-Spec Monkey Mountain Diamond 1 Morale Patch is a morale patch by Mil-Spec Monkey with hook backing for compatible loop panels. Nature-series mountain design arranged in a distinctive diamond-shaped composition, created with guest artist Absorb81. It measures approximately 2.72 x 3.5 in (6.9 x 8.9 cm).

Mil-Spec Monkey US Flag Leather Flag Patch is a flag patch by Mil-Spec Monkey with hook backing for compatible loop panels. United States flag on leather for a more vintage appearance; current production uses a subtler imprint with larger stars. It measures approximately 3.25 x 2 in (8.3 x 5.1 cm) and can be mounted on compatible clothing, packs and equipment.

The colorful Chameleon Christmas patch can introduce an interesting Christmas mood to everyday clothes, bags or backpacks. This is a 92 mm by 95 mm patch presenting a unique Santa Claus. It is based on the classic chameleon known from the Helikon-Tex logo. In this design, a bright green chameleon has a white beard and mustache, a red coat with white fur and a matching cap.

The small Compass Survival pouch is the perfect complement to your equipment with a dedicated space for carrying a compass or small elements of a survival kit. It is made of durable Cordura® 500D fabric and reinforced with a special foam. It provides protection of the pouch contents. The Compass Survival Pouch by Helikon is fastened with a Woojin 20mm buckle located on a height-adjustable flap.

Six fixed magazine pouches give the Mil-Tec® Mag Carrier Chest Rig a defined four-rifle/two-pistol layout, with no MOLLE/PALS field to reconfigure.

The Mil-Tec® Hextac Belt Pouch uses two distinct compartments in a 10 x 10 x 15 cm format, with rear straps for attaching it to MOLLE-equipped gear or a belt.

A flat front pocket and cable-routing loops define the Mil-Tec® Lightweight Chest Rig, which keeps the harness low-profile while retaining MOLLE points on the shoulder straps.

Mil-Tec® Mobile Phone Pouch MOLLE is a compact MOLLE-compatible pouch for carrying a phone or similarly sized equipment close to the body. It is useful on backpacks, tactical platforms and everyday field setups.

Mil-Tec® IFAK Laser Cut Pouch is a compact IFAK-style pouch intended to keep first-aid equipment organised and quickly removable from a compatible platform. The Laser Cut construction keeps the exterior low profile.

The Mil-Tec® Tactical Commando Pouch measures 130 x 85 x 50 mm and weighs 136 g, defining it as a compact accessory pouch rather than general bag storage.

The Polska reverse patch is a compact nationality marker designed for identification on clothing and equipment. Its Cordura 500D base, laser-cut inscription and Velcro backing are focused on durability and straightforward mounting.

The Poland reverse patch is intended primarily as a nationality identifier, which makes Flag Patches the most precise category. Cordura 500D and laser-cut lettering provide a durable construction, while Velcro supports quick placement on compatible kit.

M-Tac Deus Vult Ace Jacquard Patch is a removable hook-and-loop patch measuring 108 × 68 mm. Material: Jacquard textile.

M-Tac Odin 3D PVC Patch is a removable hook-and-loop patch measuring 105 × 75 mm. Material: Polyvinyl chloride (PVC).

M-Tac Joker Skull 3D PVC Patch is a 78 × 55 mm rubber morale patch with a raised Joker Skull motif and hook-and-loop backing.

M-Tac No Knife – No Life 3D PVC Patch is a removable hook-and-loop patch measuring 50 × 50 mm. Material: Polyvinyl chloride (PVC).

M-Tac Never Die Again 3D PVC Patch is a removable hook-and-loop patch measuring 75 × 50 mm. Material: Rubber.

M-Tac Spades Laser Cut Patch is a removable hook-and-loop patch measuring 45 × 35 mm. Material: Cordura 500D.

M-Tac® Large Elite Groin Pouch is a tactical pouch designed for organised, dependable everyday or field use. Made from 500D Cordura, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

The Elite Wallet is a compact everyday organizer for banknotes, cards, coins and documents. Cordura 1000D forms the outer structure, while the transparent PVC document window includes UV protection.

M-Tac Medic Cross Square 3D PVC Patch is a 50 × 50 mm rubber medical-identification patch with hook-and-loop backing.

M-Tac Patch Tiger Eyes Laser Cut (pair) is a removable hook-and-loop patch measuring 40 × 25 mm. Material: Cordura 500D.

M-Tac® Elite Organizer Pouch is a tactical pouch designed for organised, dependable everyday or field use. Made from Cordura 500D, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

M-Tac Undead Viking 3D PVC Patch is a removable hook-and-loop patch measuring 80 × 80 mm. Material: Rubber.

M-Tac® Cuirass QRS XL Tactical Vest is a tactical vest designed for organised, dependable everyday or field use. Made from 500D Cordura, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

M-Tac Polish Eagle Laser Cut Patch is a removable hook-and-loop patch measuring 45 × 50 mm. Material: Cordura 500D.