Tactical Gear

The Skeletonized Shotgun Shell Flap from Direct Action is an advanced skeletonized panel with pouches designed specifically for BEARCAT vests and the SPITFIRE system. This flap allows you to carry three magazines for M4/A15 rifles and up to 15 shotgun shells. The top of the magazines is secured by elastic bungee cord straps. Thanks to its skeletal construction, this flap not only features a minimalist design but is also one of the lightest panels on the market.

SPITFIRE MK II Underpouch® adds a plate-carrier underpouch function to compatible modular equipment. The design uses Cordura 500D and proprietary laminate, with front loop panel and front MOLLE/PALS slots.

SPITFIRE MK II Rapid Access Cummerbund adds a rapid-access plate-carrier cummerbund function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate, with ROC quick-release buckles and laser-cut MOLLE/PALS.

Within a compatible modular setup, SPITFIRE® Assault Panel serves as a zip-on assault back panel. The material base uses Cordura 500D; key elements are three upper hook-and-loop pouches and large velour-lined zip cargo pouch.

The Skeletonized Cummerbund Slim by Direct Action is a slim and lightweight version of a cummerbund designed for plate carrier vests. The fastening is located on the front Velcro® panel of your plate carrier. By utilizing ROC® buckles with a width of 40 mm, you can avoid the need to open the front flap every time you put on or take off your vest. Nearly the entire surface is covered with a laser-cut modular system that is compatible with MOLLE/PALS.

The Skeletonized Comms Wings Set by Direct Action is a kit of two side panels designed specifically for plate carriers, intended for carrying most models of individual radio stations, including AN/PRC-148 and AN/PRC-152. These panels feature adjustable height, allowing for a perfect fit with various radio configurations, both with and without batteries.

Within the MOSQUITO belt system, MOSQUITO H-Harness provides a H-style tactical harness shoulder-support layout. Material choice centres on Cordura 500D and Nylon 210D laminate with mesh; important details are adjustable harness and reinforced drag handle.

Within a compatible modular setup, SPITFIRE Comfort Pad Set serves as a plate-carrier comfort pad set. The material base uses VersaStretch softshell and foam; key elements are six-piece set: two front and two rear.

SPITFIRE MK II Slick Carbine Mag Flap adds a slick carbine-magazine front flap function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate and elastic webbing, with three magazine sections and optional bungee retention anchor points and hook-and-loop slots.

SPITFIRE MK II MOLLE Panel® is a zip-on MOLLE back panel for compatible modular load-bearing configurations. Materials include Cordura 500D/Nylon 210D laminate; notable details are laser-cut MOLLE/PALS surface and internal hydration/flat-item pocket.

SPITFIRE MOLLE Flap is a plate-carrier MOLLE flap for compatible modular load-bearing configurations. Materials include Cordura 500D and Nylon 210D laminate; notable details are laser-cut MOLLE/PALS front and quick configuration via dedicated flap ports or buckles.

SPITFIRE MK II Plate Carrier uses a modular plate carrier layout for compatible plates and modular equipment. Materials include Cordura 500D/Nylon 210D laminate; notable details are scalable front flap/cummerbund/back-panel system and slick rear plate bag.

Helikon-Tex camouflage yarns are light, polyester fibers, ideally suited for the Ghillie Suits camouflage. The kit includes four yarn colors: brown, dark green, light green and sand with a total weight of 480 grams. They are suitable for creating camouflage in forest areas.

The compact Training Mini Rig by Helikon has a minimalist, symmetrical layout. The carrying system is based on a comfortable, lightweight H-harness and a stabilizing hip belt. They are adjustable and detachable if necessary. The Mini Rig is perfect for training at the shooting range, also for instructors.

M-Tac Three-Point Weapon Sling is a load-carrying accessory for integrating equipment with a field setup. It weighs 140 g.

The Guardian Recce Chest Rig by Helikon-Tex is an advanced platform designed for reconnaissance operations and general green tactics. It is equipped with four buckle-closed pouches that can hold AK/AR type magazines. On the front, there is a large admin pocket lined with soft Velcro, allowing for interior customization using inserts from the VIS (Versatile Insert System).

M-Tac Double Duty Tactical Belt is a load-bearing tactical belt for attaching compatible pouches and field equipment. It uses nylon and weighs 145 g.

The Reaper QRB Plate Carrier by Invader Gear is a lightweight and versatile low-profile carrier for ballistic plates, featuring a large area for carrying equipment thanks to the full MOLLE system. The vest is made using Laser Cut technology, which ensures durability with minimal material consumption.

M-Tac Cuirass QRS Shoulder Pad is a modular accessory intended to extend or configure compatible load-carrying equipment. It uses Cordura and mounts via dedicated straps and hook-and-loop.

The Chicom Chest Rig by Helikon-Tex is a simple and versatile chest rig with its roots dating back to the 1940s. It gained popularity during the Vietnam War. This comfortable and lightweight tool enables the carriage of essential equipment in confined spaces, such as urban environments or in CQB tactics. Its adaptability makes it ideal for tactical exercises, shooting training, and reconnaissance missions. The Chicom Chest Rig features a distinctive design with cut-off sides and three pockets sealed with hook and loop closures.

The Guardian Military Set by Helikon-Tex is essential equipment for professionals serving in the military. It consists of three key components: the Guardian Plate Carrier tactical vest, two modular side panels known as Guardian Cummerbands, and the Guardian Flap front panel. This set has been designed to meet the requirements of modern soldiers.

The Leaf Ghillie Set® by Helikon-Tex is an advanced camouflage kit, constructed from lightweight mesh with sewn-on artificial leaves. Additionally, rows of paracord on the surface allow for attaching extra camouflage for better blending into the surroundings. Laser-cut leaves are double-sided with camouflage printing.

The Guardian Plate Carrier by Helikon-Tex is a tactical vest designed specifically for carrying ballistic plates. This versatile, modular design has been enhanced with elements for attaching and carrying tactical gear. One of the key advantages of this product is the use of flexible fabric, allowing for comfortable transport of ballistic plates, providing protection against bullets, fragments, and other threats. The Guardian Plate Carrier is a vest that can serve as a plate carrier and is equipped with MOLLE webbing, enabling efficient organization of additional equipment.

Three integrated magazine pockets and a fully opening front make the Mil-Tec® Plate Carrier Vest Gen.2 a plate-carrier platform with storage built into the front panel.

M-Tac® Vilha Helmet Cover is a camouflage accessory designed for organised, dependable everyday or field use. Made from Cordura 500D, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

The multifunctional mesh scarf by M-Tac is a variation of the so-called Sniper Face Veil Scarf – a sniper-style scarf designed for quick camouflage of the face and equipment. Format 180 × 90 cm and 100% cotton make it a flexible face veil, scarf or camouflage accessory.

The Mil-Tec® Sniper Camouflage Scarf 190 x 90 cm uses an open mesh construction that can break up outlines and accept local vegetation for additional camouflage.

Six fixed magazine pouches give the Mil-Tec® Mag Carrier Chest Rig a defined four-rifle/two-pistol layout, with no MOLLE/PALS field to reconfigure.

Helikon's carefully crafted Numbat bag is made of Cordura® 500D material. It is a kind of chest backpack that holds all the necessary handy equipment items. Thanks to adjustable fastening straps and a mesh panel on the back, it ensures comfortable carrying even with a backpack. On the outside, the bag has two pockets with tabs made of elastic Versa Stretch fabric.

Camouflage Leaf Ghillie Poncho® by Helikon-Tex made of polyester in double-sided US Woodland camouflage with artificial leaves. The material from which the poncho is made is highly breathable and does not absorb moisture. The entire surface of the Leaf Ghillie Poncho® is sewn with a cord to tie additional camouflage yarns or natural materials.

The universal Guardian Chest Rig from Helikon is a platform that allows you to carry ammunition and equipment. It allows modular expansion thanks to compatibility with MOLLE / PALS on the bottom panel and the top of the pocket. The platform enables owner to use a belt and a backpack at the same time. Detachable, adjustable shoulder straps create a comfortable X-type carrying system.

The high-quality Helikon-Tex camouflage set is an inseparable element of the camouflage of snipers, scouts and civilian enthusiasts operating in the field. Four elements - tunic, pants, a hat and a weapon camouflaging tape are made of airy mesh with masking elements attached. Thanks to its loose cut, the universal Ghillie Suit set can be worn over a uniform.

For a front-mounted load, THUNDERBOLT Compact Chest Rig uses a compact chest rig layout for magazines and essential equipment. Materials include Cordura 500D and Nylon 210D laminate; notable details are fixed carbine and pistol magazine pouches and zippered utility pocket.

Designed for compatible modular systems, MOSQUITO Drop Leg Panel functions as a high-ride drop-leg MOLLE panel. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are stiffened platform and MOLLE/PALS slots.

A profiled modular belt sleeve for gun belts up to 45 mm wide, with laser-cut MOLLE/PALS and a soft inner interface. Side holster slots, harness loops and compatibility with dedicated panels make it a flexible load platform.

The refined COMPETITION MultiGun Rig tactical vest is dedicated for MultiGun shooters. This is a product from the Range Helikon-Tex line. It was made of durable Cordura® 500D material, plastic elements are durable Woojin buckles. The base for the structure is a belt with an added micro chest rig that allows for stabilization. The structure can be extended with a modular sleeve.

A flat inner stabilising belt for Direct Action MUSTANG, WARHAWK and MOSQUITO systems. Its hook surface couples to loop-lined outer belts to reduce ride-up while keeping the waist area free from a second bulky buckle.

Cargo Pack from Invader Gear has been specially designed for mounting on tactical vests, offering users high-quality craftsmanship and exceptional functionality. Thanks to the MOLLE system, it can be easily and securely attached to the vest.

M-Tac War Belt Armor Tegris D-Ring Cobra is a load-bearing tactical belt for attaching compatible pouches and field equipment. It uses Cordura 500D with Tegris inserts and weighs 460 g.

The Reaper Plate Carrier by Invader Gear is a lightweight and versatile ballistic plate carrier designed to provide users with comfortable and secure operation. Equipped with a full MOLLE system, it allows for carrying various types of equipment, making it perfect for special operations.

M-Tac Range Belt Cobra Buckle Gen.IV is a load-bearing tactical belt for attaching compatible pouches and field equipment. The belt acts as a waist-borne platform, keeping compatible pouches and accessories distributed around the body.

M-Tac Front Panel for Plate Carrier is a modular accessory intended to extend or configure compatible load-carrying equipment. It uses Cordura 500D, has a capacity of 3 magazines and weighs 75 g.

M-Tac Cuirass QRS Front Magazine Panel is a modular accessory intended to extend or configure compatible load-carrying equipment. It uses Cordura 500D, has a capacity of 3 magazines and weighs approx. 100 g.

Mil-Tec® Self-Clinging Camouflage Tape 50 mm x 4.5 m wraps around equipment without conventional adhesive and can be removed without leaving glue residue.

M-Tac Chest Rig Elite is a chest rig for carrying magazines and compact field equipment on the torso. The chest-rig format keeps selected equipment on the front of the torso and distributes the load through its harness.

Sniper Bolero Leaf by Invader Gear is a minimalist camouflage netting designed to improve camouflage properties and reduce weight. This outer layer garment, typically worn over the uniform and equipment, is made of lightweight yet durable material in a camouflaging pattern.

Direct Action Spitfire MK II Modular Cummerbund is a Cordura® laminate side panel for DA Hellcat and Spitfire plate carriers. Laser-cut MOLLE/PALS, hook-and-loop fastening and flexible nylon lining support modular attachment and adjustment.

HELLCAT Low Vis Plate Carrier® is a low-visibility plate carrier for compatible protective plates and modular equipment. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are elastic cummerbund with integrated pockets and front magazine flap and front.

Compact Warwick Mini Chest Rig made from Cordura® 500D laminate with laser-cut MOLLE/PALS slots and a flexible nylon inner layer. Internal pockets for flat items and quick-detach shoulder straps add organisation and configurable carry.

Designed for compatible modular systems, SPITFIRE Comms Wing Inserts functions as a plate-carrier radio wing. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are adjustable height and width and elastic side panels.