Tactical Gear

For a front-mounted load, TYPHOON Chest Rig uses a modular chest rig layout for magazines and essential equipment. Material choice centres on Cordura 500D and Nylon 210D laminate; important details are large laser-cut MOLLE/PALS surface and four internal hook-and-loop pockets.

Designed for compatible modular systems, SPITFIRE Comms Wing Inserts functions as a plate-carrier radio wing. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are adjustable height and width and elastic side panels.

SPITFIRE MK II Backpack Panel serves as a zip-on backpack panel within a modular carrying setup. The design uses Cordura 500D and proprietary laminate, with zippered main compartment and flat front zip pocket.

The Bearcat Ultralight Plate Carrier from Direct Action is an exceptionally lightweight and versatile tactical vest, designed with the modern battlefield in mind. Crafted from laser-cut Cordura and softshell material, this vest excels in saving grams, which is crucial in demanding conditions where you often need to wear it for hours or even days. It's worth emphasizing that every gram saved on your gear can translate into more ammunition, which is of utmost importance in tactical situations.

The Skeletonized Cummerbund Slim by Direct Action is a slim and lightweight version of a cummerbund designed for plate carrier vests. The fastening is located on the front Velcro® panel of your plate carrier. By utilizing ROC® buckles with a width of 40 mm, you can avoid the need to open the front flap every time you put on or take off your vest. Nearly the entire surface is covered with a laser-cut modular system that is compatible with MOLLE/PALS.

The Direct Action Skeletonized Triple 223 Flap is an advanced, skeletonized load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This innovative panel allows for carrying three magazines for M4/AR15 rifles. The magazines are secured with elastic bungee cord retainers, ensuring secure and quick access to ammunition. Thanks to its skeletal construction, the flap is not only minimalist but also one of the lightest options available on the market. It excels in situations where every gram of equipment matters.

The Guardian Recce Chest Rig by Helikon-Tex is an advanced platform designed for reconnaissance operations and general green tactics. It is equipped with four buckle-closed pouches that can hold AK/AR type magazines. On the front, there is a large admin pocket lined with soft Velcro, allowing for interior customization using inserts from the VIS (Versatile Insert System).

HELLCAT Low Vis Plate Carrier® is a low-visibility plate carrier for compatible protective plates and modular equipment. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are elastic cummerbund with integrated pockets and front magazine flap and front.

Within a compatible modular setup, SPITFIRE® Assault Panel serves as a zip-on assault back panel. The material base uses Cordura 500D; key elements are three upper hook-and-loop pouches and large velour-lined zip cargo pouch.

The Skeletonized Comms Wings Set by Direct Action is a kit of two side panels designed specifically for plate carriers, intended for carrying most models of individual radio stations, including AN/PRC-148 and AN/PRC-152. These panels feature adjustable height, allowing for a perfect fit with various radio configurations, both with and without batteries.

The Skeletonized Triple 308 Flap from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This load-bearing panel is designed to carry three SR (.308WIN) magazines, securely held in place by elastic bungee cord straps. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

Direct Action Spitfire MK II Modular Cummerbund is a Cordura® laminate side panel for DA Hellcat and Spitfire plate carriers. Laser-cut MOLLE/PALS, hook-and-loop fastening and flexible nylon lining support modular attachment and adjustment.

The Skeletonized Shotgun Shell Flap from Direct Action is an advanced skeletonized panel with pouches designed specifically for BEARCAT vests and the SPITFIRE system. This flap allows you to carry three magazines for M4/A15 rifles and up to 15 shotgun shells. The top of the magazines is secured by elastic bungee cord straps. Thanks to its skeletal construction, this flap not only features a minimalist design but is also one of the lightest panels on the market.

Designed for compatible modular systems, MOSQUITO Drop Leg Panel functions as a high-ride drop-leg MOLLE panel. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are stiffened platform and MOLLE/PALS slots.

M-Tac® Sturm Gen.II Vest is a tactical vest designed for organised, dependable everyday or field use. Made from Cordura 500D, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

M-Tac® Sturm Vest is a tactical vest designed for organised, dependable everyday or field use. Made from Cordura 500D, it combines practical access with a durable, low-fuss construction that integrates naturally with tactical, outdoor or EDC equipment.

CORSAIR Low Profile Plate Carrier® uses a low-profile plate carrier layout for compatible plates and modular equipment. The design uses VersaStretch nylon: 93% nylon, 7% elastane, with fully elastic cummerbund with internal carbine/pistol magazine pockets and no external hook-and-loop panels.

SPITFIRE MK II Slick Carbine Mag Flap adds a slick carbine-magazine front flap function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate and elastic webbing, with three magazine sections and optional bungee retention anchor points and hook-and-loop slots.

Four-point tactical belt harness that distributes load across the shoulders and adds laser-cut MOLLE mounting space.

Padded MOLLE tactical belt sleeve for inner belts up to 50 mm, with four harness attachment points and replaceable padding.

Padded and stiffened MOLLE tactical belt designed as a stable first-line platform for pouches, holsters and compatible harnesses.

Multicurved 1.5 kg training insert for 25 × 30 cm plate carriers; realistic training load with no ballistic properties.

The high-quality Helikon-Tex camouflage set is an inseparable element of the camouflage of snipers, scouts and civilian enthusiasts operating in the field. Four elements - tunic, pants, a hat and a weapon camouflaging tape are made of airy mesh with masking elements attached. Thanks to its loose cut, the universal Ghillie Suit set can be worn over a uniform.

Protective modular carrier for 250 × 300 mm hard plates and soft armor panels, with ROC quick release, laser-cut PALS and 3D-mesh comfort.

Integrated ballistic carrier for 25 × 30 cm hard plates plus front, rear and side soft armor, with ROC and Gen4-compatible placard interface.

The Skeletonized Cummerbund Wide by Direct Action is an extended version of a minimalist and lightweight cummerbund designed for plate carrier vests. It serves as an excellent companion for all Direct Action® platforms, including the BEARCAT® Ultralight Plate Carrier. This cummerbund is crafted from flexible nylon, allowing not only the carriage of flat items but also soft and hard ballistic protection.

Hybrid plate-carrier cummerbund with ROC quick release, elastic fit, laser-cut MOLLE and ventilation for TPC/CPC-compatible carriers.

Modular Gen 4 plate carrier for 25 × 30 cm plates with ROC quick release, laser-cut MOLLE, CoolMax padding and rear zip-panel interface.

Conversion harness that turns compatible CPC/TPC front panels into a stand-alone chest rig, with MOLLE side wings and CoolMax body-side panel.

Designed for compatible modular systems, SPITFIRE SMG Flap functions as a SMG magazine front flap. Material choice centres on proprietary laminate; important details are four adjustable SMG-magazine pouches and Hypalon retention pullers and laser-cut MOLLE/PALS front.

MOSQUITO Y-Harness is a Y-style tactical harness for the modular MOSQUITO belt system. Materials include laminate/webbing construction; notable details are low-profile Y configuration and elastic back section.

Designed for compatible modular systems, SPITFIRE Shotgun Shell Flap functions as a shotgun-shell front flap. Material choice centres on proprietary laminate; important details are three elastic shell columns and up to 21 standard 12GA shells.

SPITFIRE Plate Carrier is a modular plate carrier for compatible protective plates and modular equipment. The material base uses Cordura 500D and proprietary laminate; key elements are laser-cut modular construction and quick-release system and front flap.

Within a compatible modular setup, SPITFIRE Cutaway System® serves as a plate-carrier cutaway system. The material base uses polyester/webbing components; key elements are quick-release retrofit and field reassembly without cutting release elements.

MOSQUITO Hip Panel S is a small tactical belt hip panel for compatible modular load-bearing configurations. Materials include proprietary laminate; notable details are stiffened MOLLE/PALS mounting platform.

A slim tactical belt sleeve for 45 mm belts with fixed elastic pouches for magazines, radio, first aid and tourniquet. Its stiffened low-profile laminate body also supports an inner belt and compatible OWB holsters.

Low-profile Gen 4 plate carrier for 25 × 30 cm plates with modular front panels, adjustable MOLLE cummerbund and zip-on rear interface.

A split-front full-size chest rig made from Cordura® 500D and Nylon 210D laminate with fixed magazine storage. It adds flat inner pockets, body-armour interfaces, modular shoulder straps and comms routing.

For a front-mounted load, THUNDERBOLT Compact Chest Rig uses a compact chest rig layout for magazines and essential equipment. Materials include Cordura 500D and Nylon 210D laminate; notable details are fixed carbine and pistol magazine pouches and zippered utility pocket.

The compact Training Mini Rig by Helikon has a minimalist, symmetrical layout. The carrying system is based on a comfortable, lightweight H-harness and a stabilizing hip belt. They are adjustable and detachable if necessary. The Mini Rig is perfect for training at the shooting range, also for instructors.

SPITFIRE MK II Elastic Cummerbund adds an elastic plate-carrier cummerbund function to compatible modular equipment. The design uses 100 mm elastic webbing, with sectioned magazine pockets and laminate pull tabs.

A flat inner stabilising belt for Direct Action MUSTANG, WARHAWK and MOSQUITO systems. Its hook surface couples to loop-lined outer belts to reduce ride-up while keeping the waist area free from a second bulky buckle.

A profiled modular belt sleeve for gun belts up to 45 mm wide, with laser-cut MOLLE/PALS and a soft inner interface. Side holster slots, harness loops and compatibility with dedicated panels make it a flexible load platform.

SPITFIRE MK II Modular Cummerbund Slim is a slim modular plate-carrier cummerbund for compatible modular load-bearing configurations. Materials include Cordura 500D and Nylon 210D laminate; notable details are single-layer construction and laser-cut MOLLE/PALS.

A 45 mm waterborne tactical belt using an all-steel AustriAlpin® Cobra Nautic buckle for prolonged salty-environment exposure. Rigid webbing, loop lining and a reinforced anchor point complete the load-bearing construction.

A slim, rigid tactical belt made from proprietary laminate and heavy-duty tubular webbing. The AustriAlpin® Cobra buckle, reinforced anchor point and compatibility with Direct Action inner and sleeve systems support a stable equipment setup.

Designed for compatible modular systems, SPITFIRE MK II Elastic Cummerbund Slim Belt functions as a slim elastic plate-carrier cummerbund. Material choice centres on single-layer elastic webbing; important details are slick construction without side pouches.

The Tactical Hornet Skeletonized Belt Sleeve from Direct Action is an advanced platform designed for the comfortable transport of weapons, ammunition, and essential equipment. Its unique design is based on an innovative skeletal system, fully compatible with MOLLE/PALS, tailored to meet the latest needs in military conditions. In today's military reality, the importance of reducing equipment weight is unquestionable.

TIGER MOTH Chest Rig provides a chest rig format that keeps magazines and essential equipment close to the torso. The material base uses proprietary laser-cut laminate, Cordura 500D and softshell; key elements are integrated adjustable rifle-magazine pouches and side PALS platforms.

MOSQUITO Hip Panel L is a large tactical belt hip panel for compatible modular load-bearing configurations. Materials include proprietary laminate; notable details are stiffened MOLLE/PALS mounting platform and large version supports Safariland 3-hole pistol holster mounting.