Equipment

The Compact Med Pouch Horizontal by Direct Action is a compact tool designed for carrying essential pre-medical first aid supplies with a vertical mounting system in mind. Constructed from durable Cordura® 500D, 210D nylon, and laser-cut laminate, this pouch has been specifically engineered for attachment to the rear of a belt. It pairs perfectly with the HORNET® Skeletonized Belt Sleeve, but can also be attached to any MOLLE/PALS compatible platform or a belt with a width of up to 45mm using the practical paracord loops.

Compact magnetic holder for temporarily retaining a shotgun or carbine against MOLLE/PALS equipment or a belt. Laminate and Hypalon® construction surrounds a strong internal magnet in a semi-rigid body.

The Helikon Competition Dump Pouch is a great solution for shooters - for dynamic training or competition. It is a dump bag for empty magazines or cartridges. It can accommodate several rifle or pistol magazines. The product from the Competition Range Line series from Helikon is made of durable Cordura fabric, and the bottom of pouch is made of mesh.

Mil-Tec Foldable Binoculars 10x25 use 10x magnification and 25 mm objectives in a folding compact format. The small optical body is intended for users who prioritise pack size for travel, hiking or occasional observation.

Within the MOSQUITO belt system, MOSQUITO H-Harness provides a H-style tactical harness shoulder-support layout. Material choice centres on Cordura 500D and Nylon 210D laminate with mesh; important details are adjustable harness and reinforced drag handle.

MOSQUITO Y-Harness is a Y-style tactical harness for the modular MOSQUITO belt system. Materials include laminate/webbing construction; notable details are low-profile Y configuration and elastic back section.

Warwick Slick Chest Rig uses proprietary laminate with laser-cut MOLLE/PALS across its modular front. A flexible nylon inner layer, internal pockets for flat items and detachable shoulder straps create a low-profile configurable platform.

A split-front full-size chest rig made from Cordura® 500D and Nylon 210D laminate with fixed magazine storage. It adds flat inner pockets, body-armour interfaces, modular shoulder straps and comms routing.

MOSQUITO Hip Panel S is a small tactical belt hip panel for compatible modular load-bearing configurations. Materials include proprietary laminate; notable details are stiffened MOLLE/PALS mounting platform.

SPITFIRE MK II Rapid Access Cummerbund adds a rapid-access plate-carrier cummerbund function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate, with ROC quick-release buckles and laser-cut MOLLE/PALS.

Short open-top rifle magazine pouch for AR, AK and SR-pattern magazines. A semi-rigid Cordura® 500D laminate body, adjustable shock cord and PALS/belt mounting support fast access with secure retention.

For modular equipment setups, Utility Pouch Mini provides a mini zippered utility pouch format. The material base uses Cordura 500D; key elements are zip opening and internal elastic retention strap.

The Skeletonized Cummerbund Slim by Direct Action is a slim and lightweight version of a cummerbund designed for plate carrier vests. The fastening is located on the front Velcro® panel of your plate carrier. By utilizing ROC® buckles with a width of 40 mm, you can avoid the need to open the front flap every time you put on or take off your vest. Nearly the entire surface is covered with a laser-cut modular system that is compatible with MOLLE/PALS.

Designed for compatible modular systems, MOSQUITO Drop Leg Panel functions as a high-ride drop-leg MOLLE panel. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are stiffened platform and MOLLE/PALS slots.

Low-profile baton pouch with elastic and semi-rigid construction for discreet belt carry. It fits common expandable batons and mounts directly on belts up to 45 mm wide.

For modular equipment setups, Speed Reload Pouch Rifle provides an open-top rifle magazine pouch format. Materials include proprietary laminate; notable details are semi-rigid construction and adjustable shockcord retention.

DFMR fast rifle magazine pouch for two AR-15, AK-47, AK-74, SR-25 or similar magazines. Anti-slip lining and shock-cord adjustment hold the magazines securely, while polymer reinforcement and external MOLLE compatibility support modular use.

FMPM fast magazine pouch for one machine-pistol or long pistol magazine. Anti-slip lining and shock-cord adjustment hold the magazine securely, while polymer front reinforcement and MOLLE compatibility support modular carry.

Mil-Tec® Self-Clinging Camouflage Tape 50 mm x 4.5 m wraps around equipment without conventional adhesive and can be removed without leaving glue residue.

Polish subdued flag patch from Helikon is a great way to personalize clothing, backpacks or bags. The simple design includes a two-color rectangle with a masked Polish flag. The patch is made of PVC material. The bottom layer is sharp velcro that can be easily attached to velcro panels or other soft velor velcro. It is part of the Helikon-Tex Morale Line product series.

The Helikon-Tex SAR (Search and Rescue) vest is a specialized vest designed for medical rescuers. Made from lightweight and breathable mesh, it is fully covered with MOLLE/PALS webbing, allowing for complete customization and adaptation of equipment to individual needs. Thanks to large reflective elements, the vest ensures excellent visibility even in harsh weather conditions and at night

The Chest Pack Numbat Small by Helikon-Tex is a smaller, lighter version of the proven chest pack, designed for maximum functionality and mobility. Perfect for those who carry only what they truly need – whether in the city, outdoors, or while traveling. It can be worn on the chest or – after detaching the shoulder straps and stowing the buckles – converted into a waist pack.

Mil-Tec Foldable Binoculars Gen. II 10x25 combine 10x magnification with 25 mm objectives in a folding dual-tube design. The model adds central focusing, soft eyecups and a 101 m / 1000 m field of view, with a neck strap and cleaning cloth supplied.

A-10 Warthog Patch by Helikon-Tex is “BRRRT” you can wear – a striking morale patch featuring the iconic attack aircraft roaring in. The design references the A-10 Thunderbolt II (Warthog), an American aircraft built for close air support of ground forces. Introduced in the 1970s, the A-10 became famous for destroying tanks, armored vehicles, and other ground targets. The slogan “BRRRT” mimics the distinctive sound of the GAU-8/A cannon – a motif often seen in pop culture, symbolizing the firepower and legendary status of the Warthog.

Helikon-Tex Lens Cleaning Cloth is perfect for cleaning optics – glasses, binoculars, scopes, red dot sights, night vision devices, and smartphone screens. Made from ultra-soft, tightly woven microfiber, it effectively removes grease and dirt without leaving scratches or damaging delicate coatings.

For modular equipment setups, Tourniquet Pouch® provides a covered tourniquet pouch format. The design uses Cordura 500D/Nylon 210D laminate, with hook-and-loop protective flap and TQ identification marking.

The compact Competition Rapid Pistol Pouch by Helikon-Tex is designed for mounting on a belt with a maximum width of 50 mm. The pouch is also compatible with the MOLLE / PALS mounting system. It fits one, standard pistol magazine. Thanks to its special design, it allows for its quick holstering. Partial stiffening of the structure allows for convenient storage of magazines.

Convertible two-point carbine sling with a softshell neck section and one-hand length adjustment. Paracord attachment loops and ITW Nexus® hardware support quiet, flexible carry.

The spacious Competition Utility Pouch by Helikon-Tex is a pouch for handy accessories. It has been designed to complement the COMPETITION MultiGun Rig, to be suspended under the belt. It also has a MOLLE / PALS compatible strap system. This ensures universal application. It can be mounted on a belt with a maximum width of 50 mm. The product is made of durable Cordura® 500D material.

The spacious Water Canteen pouch is a solution dedicated to carrying bottles or canteens for water. Thanks to it, you can always have something to drink at hand, for example at the waist. It will fit a 1 liter TRITAN ™ BOTTLE WIDE MOUTH bottle with a cup. The pouch is made of Cordura®️ 500D material and fastened with a Woojin buckle.

The Bushcraft Dump pouch is a universal product that works well even in the wild area. It is made of Cordura®️ 500D material. The upper part of the pouch has a welt - shockcord with a stopper to secure the contents against falling out. At the top, there is also a small flap fastened with Velcro, which additionally allows you to roll up the pouch to protect it against self-unfolding.

The universal SERE pouch by Helikon-Tex has been designed for carrying survival or bushcrafting equipment. As you can conclude from the extension of its name SERE - Survival, Evasion, Resistance and Escape, it will accommodate the necessary accessories such as a folding knife, multitool, flashlight, lighter or tinder. Internal open pockets and one mesh pocket, closed with a zipper, will be used for this.

Three integrated magazine pockets and a fully opening front make the Mil-Tec® Plate Carrier Vest Gen.2 a plate-carrier platform with storage built into the front panel.

The Mil-Tec® Sniper Camouflage Scarf 190 x 90 cm uses an open mesh construction that can break up outlines and accept local vegetation for additional camouflage.

A flat front pocket and cable-routing loops define the Mil-Tec® Lightweight Chest Rig, which keeps the harness low-profile while retaining MOLLE points on the shoulder straps.

The Mil-Tec® PARA Pouch is a compact 12 x 10 x 6 cm cotton pocket with a snap-secured flap and a fixed rear loop for direct belt carry.

M-Tac No Knife – No Life 3D PVC Patch is a removable hook-and-loop patch measuring 50 × 50 mm. Material: Polyvinyl chloride (PVC).

Dual IR Patch Austria from Clawgear with Velcro fastening.

Mil-Spec Monkey Bunny Girl Morale Patch is a embroidered morale patch by Mil-Spec Monkey with a sewn-on hook backing for compatible loop panels. Playful Bunny Girl character design by guest artist PinkVersusBlack. It measures approximately 2.73 x 2.9 in (6.9 x 7.4 cm) and can be moved between compatible caps, packs, clothing and tactical gear.

Within a compatible modular setup, SPITFIRE Triple Rifle Magazine Flap® serves as a triple rifle-magazine front flap. The material base uses proprietary laminate; key elements are three adjustable rifle-magazine pouches and Hypalon retention handles.

Direct Action Simple Silencer Cover Short is a suppressor wrap designed for silencers 12 cm long and 40 mm in diameter. Its adjustable construction helps reduce the mirage effect caused by a heated suppressor.

Compact Warwick Mini Chest Rig made from Cordura® 500D laminate with laser-cut MOLLE/PALS slots and a flexible nylon inner layer. Internal pockets for flat items and quick-detach shoulder straps add organisation and configurable carry.

SPITFIRE Plate Carrier is a modular plate carrier for compatible protective plates and modular equipment. The material base uses Cordura 500D and proprietary laminate; key elements are laser-cut modular construction and quick-release system and front flap.

SPITFIRE MK II Elastic Cummerbund adds an elastic plate-carrier cummerbund function to compatible modular equipment. The design uses 100 mm elastic webbing, with sectioned magazine pockets and laminate pull tabs.

Within a compatible modular setup, SPITFIRE® Assault Panel serves as a zip-on assault back panel. The material base uses Cordura 500D; key elements are three upper hook-and-loop pouches and large velour-lined zip cargo pouch.

Direct Action Slick Carbine Mag Pouch carries one AK/AR magazine in a low-profile body made from laminate and wide elastic webbing. Partial stiffening and laminate pull tabs aid insertion, while MOLLE/PALS and 45 mm belt mounting provide two attachment options.

Direct Action Slick Radio Pouch is a low-profile adjustable carrier for most medium-size personal radios. Wide elastic webbing and a retention cord adjust height and width, while a stiffened laminate back supports MOLLE/PALS or belt mounting.

Vertical medical pouch with a removable fold-out insert and loop-marked outer flap. Cordura® 500D/laminate construction, elastic organisation and PALS or 45 mm belt mounting keep the layout compact.

Combat Stretcher is a foldable field stretcher designed to pack down for transport with field equipment. The material base uses double-layer Nylon Micro Rip-Stop; key elements are eight reinforced carry handles and two integrated flat pockets.

The Bearcat Ultralight Plate Carrier from Direct Action is an exceptionally lightweight and versatile tactical vest, designed with the modern battlefield in mind. Crafted from laser-cut Cordura and softshell material, this vest excels in saving grams, which is crucial in demanding conditions where you often need to wear it for hours or even days. It's worth emphasizing that every gram saved on your gear can translate into more ammunition, which is of utmost importance in tactical situations.