Tactical Gear

Sniper Bolero Leaf by Invader Gear is a minimalist camouflage netting designed to improve camouflage properties and reduce weight. This outer layer garment, typically worn over the uniform and equipment, is made of lightweight yet durable material in a camouflaging pattern.

The Invader Gear Molle Panel is specially designed for the Reaper QRB Plate Carrier tactical vests and is attached using hook-and-loop fasteners and snap buckles.

The Admin Chest Panel Core from Clawgear is a versatile administrative panel designed for most MOLLE-compatible vests. It features a flat closure pocket, a spacious pocket with velcro surface for patches, and a flexible organizer made of tape, allowing for storage of various accessories.

Cargo Pack from Invader Gear has been specially designed for mounting on tactical vests, offering users high-quality craftsmanship and exceptional functionality. Thanks to the MOLLE system, it can be easily and securely attached to the vest.

The refined COMPETITION MultiGun Rig tactical vest is dedicated for MultiGun shooters. This is a product from the Range Helikon-Tex line. It was made of durable Cordura® 500D material, plastic elements are durable Woojin buckles. The base for the structure is a belt with an added micro chest rig that allows for stabilization. The structure can be extended with a modular sleeve.

M-Tac Range Belt Cobra Buckle Gen.IV is a load-bearing tactical belt for attaching compatible pouches and field equipment. The belt acts as a waist-borne platform, keeping compatible pouches and accessories distributed around the body.

M-Tac War Belt Armor Tegris D-Ring Cobra is a load-bearing tactical belt for attaching compatible pouches and field equipment. It uses Cordura 500D with Tegris inserts and weighs 460 g.

Helikon-Tex Guardian Kangaroo Flap Cordura® 500D Field is a front panel designed for the Guardian Plate Carrier, providing additional space for carrying and organizing tactical equipment. The panel attaches to the plate carrier using two buckles and hook-and-loop fastener. It features a large box-shaped pouch with an internal hook-and-loop panel for mounting the Law Enforcement Insert and Competition system inserts.

The Helikon-Tex Guardian Cummerbund Polyester Field is a functional set of side panels designed to connect the front and rear sections of a plate carrier. Its universal design allows it to be used with various plate carrier models available on the market. The panels are made of durable structural mesh, providing good ventilation even when additional equipment is attached. The outer surface features MOLLE/PALS-compatible webbing, allowing pouches and tactical accessories to be attached conveniently.

Chicom Chest Rig Cordura® 500D Field by Helikon-Tex is a classic design in a modern configuration. This lightweight and simple chest rig is designed to comfortably carry essential equipment. Centrally positioned magazine pouches provide quick access while moving or working in confined spaces, while the design works well with a backpack.

Helikon-Tex Guardian Recce Chest Rig Cordura® 500D Field is a versatile chest rig designed for carrying equipment and ammunition. The PL Woodland version uses materials with NIR/IRR properties that help reduce silhouette contrast when viewed through near-infrared equipment.

Guardian Dangler Cordura® 500D Field by Helikon-Tex is a suspended pouch designed for the Guardian Plate Carrier Field, featuring NIR/IRR functionality that reduces silhouette contrast when viewed through night vision devices. Field products in PL Woodland camouflage feature NIR (Near Infrared) functionality, also referred to as IRR (Infrared Reflective).

The Reaper QRB Plate Carrier by Invader Gear is a lightweight and versatile low-profile carrier for ballistic plates, featuring a large area for carrying equipment thanks to the full MOLLE system. The vest is made using Laser Cut technology, which ensures durability with minimal material consumption.

M-Tac Bandolier Elite is a wearable load-carrying harness for distributing compact equipment across the torso. The bandolier format carries a defined set of compact items across the torso instead of placing them in a hand-carried bag.

M-Tac Tiger Inner Belt for Range Belt is an accessory intended to work with a compatible tactical belt system. It uses Cordura 500D.

M-Tac Front Panel for Plate Carrier is a modular accessory intended to extend or configure compatible load-carrying equipment. It uses Cordura 500D, has a capacity of 3 magazines and weighs 75 g.

M-Tac Tactical Belt Suspenders Elite is an accessory intended to work with a compatible tactical belt system. It uses nylon 500D.

M-Tac Single-Point Weapon Sling is a load-carrying accessory for integrating equipment with a field setup. It weighs 140 g.

The Chicom Chest Rig by Helikon-Tex is a simple and versatile chest rig with its roots dating back to the 1940s. It gained popularity during the Vietnam War. This comfortable and lightweight tool enables the carriage of essential equipment in confined spaces, such as urban environments or in CQB tactics. Its adaptability makes it ideal for tactical exercises, shooting training, and reconnaissance missions. The Chicom Chest Rig features a distinctive design with cut-off sides and three pockets sealed with hook and loop closures.

Self-clinging camo tape from Helikon is an excellent and lightweight solution for masking. It works in particular in hiding weapons or equipment such as binoculars or hunting equipment. The optimal width of the tape of about 5 cm allows you to carefully wrap the selected accessory.

MOSQUITO Hip Panel L is a large tactical belt hip panel for compatible modular load-bearing configurations. Materials include proprietary laminate; notable details are stiffened MOLLE/PALS mounting platform and large version supports Safariland 3-hole pistol holster mounting.

Carbine Wings Set by Helikon-Tex is a set of additional external pockets for the COMPETITION MultiGun Rig tactical vest. They are made of resistant and durable Cordura® 500D fabric. Each of the two pockets holds one standard AR/AK magazine. The interior has been finished with an antislip surface.

Helikon's carefully crafted Numbat bag is made of Cordura® 500D material. It is a kind of chest backpack that holds all the necessary handy equipment items. Thanks to adjustable fastening straps and a mesh panel on the back, it ensures comfortable carrying even with a backpack. On the outside, the bag has two pockets with tabs made of elastic Versa Stretch fabric.

The compact Training Mini Rig by Helikon has a minimalist, symmetrical layout. The carrying system is based on a comfortable, lightweight H-harness and a stabilizing hip belt. They are adjustable and detachable if necessary. The Mini Rig is perfect for training at the shooting range, also for instructors.

The Training Mini Rig by Helikon-Tex is a functional equipment, useful during training or shooting instruction. Thanks to the symmetrical arrangement of the pouches and the carrying system, it is comfortable to use. Detachable and adjustable H-harness complements the hip belt. Three velcro panels facilitate identification and personalization.

The Guardian Plate Carrier by Helikon-Tex is a durable tactical vest designed to carry ballistic plates. Made from abrasion-resistant Cordura® 500D with a DWR water-repellent coating and reliable Woojin® components.

SPITFIRE MK II Rapid Access Cummerbund adds a rapid-access plate-carrier cummerbund function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate, with ROC quick-release buckles and laser-cut MOLLE/PALS.

Within a compatible modular setup, SPITFIRE Triple Rifle Magazine Flap® serves as a triple rifle-magazine front flap. The material base uses proprietary laminate; key elements are three adjustable rifle-magazine pouches and Hypalon retention handles.

For a front-mounted load, TYPHOON Chest Rig uses a modular chest rig layout for magazines and essential equipment. Material choice centres on Cordura 500D and Nylon 210D laminate; important details are large laser-cut MOLLE/PALS surface and four internal hook-and-loop pockets.

Helikon-Tex Guardian Military Cordura® 500D Field is a complete, modular set designed for demanding field use. The PL Woodland version features materials with NIR/IRR properties, reducing the contrast of the silhouette when viewed through near-infrared equipment.

Warwick Zip Front Chest Rig combines a front zip with laser-cut MOLLE/PALS laminate and quick-release shoulder straps. An internal pocket, Sniper Panel compatibility and mounting to SPITFIRE MK I/II or Hellcat plate carriers support modular use.

The Mil-Tec® Sniper Camouflage Scarf 190 x 90 cm uses an open mesh construction that can break up outlines and accept local vegetation for additional camouflage.

Six fixed magazine pouches give the Mil-Tec® Mag Carrier Chest Rig a defined four-rifle/two-pistol layout, with no MOLLE/PALS field to reconfigure.

Three integrated magazine pockets and a fully opening front make the Mil-Tec® Plate Carrier Vest Gen.2 a plate-carrier platform with storage built into the front panel.

The high-quality Helikon-Tex camouflage set is an inseparable element of the camouflage of snipers, scouts and civilian enthusiasts operating in the field. Four elements - tunic, pants, a hat and a weapon camouflaging tape are made of airy mesh with masking elements attached. Thanks to its loose cut, the universal Ghillie Suit set can be worn over a uniform.

The Helikon-Tex SAR (Search and Rescue) vest is a specialized vest designed for medical rescuers. Made from lightweight and breathable mesh, it is fully covered with MOLLE/PALS webbing, allowing for complete customization and adaptation of equipment to individual needs. Thanks to large reflective elements, the vest ensures excellent visibility even in harsh weather conditions and at night

The Chest Pack Numbat Small by Helikon-Tex is a smaller, lighter version of the proven chest pack, designed for maximum functionality and mobility. Perfect for those who carry only what they truly need – whether in the city, outdoors, or while traveling. It can be worn on the chest or – after detaching the shoulder straps and stowing the buckles – converted into a waist pack.

The Guardian Military Set by Helikon-Tex is essential equipment for professionals serving in the military. It consists of three key components: the Guardian Plate Carrier tactical vest, two modular side panels known as Guardian Cummerbands, and the Guardian Flap front panel. This set has been designed to meet the requirements of modern soldiers.

The Guardian Plate Carrier by Helikon-Tex is a tactical vest designed specifically for carrying ballistic plates. This versatile, modular design has been enhanced with elements for attaching and carrying tactical gear. One of the key advantages of this product is the use of flexible fabric, allowing for comfortable transport of ballistic plates, providing protection against bullets, fragments, and other threats. The Guardian Plate Carrier is a vest that can serve as a plate carrier and is equipped with MOLLE webbing, enabling efficient organization of additional equipment.

The Leaf Ghillie Set® by Helikon-Tex is an advanced camouflage kit, constructed from lightweight mesh with sewn-on artificial leaves. Additionally, rows of paracord on the surface allow for attaching extra camouflage for better blending into the surroundings. Laser-cut leaves are double-sided with camouflage printing.

M-Tac Double Duty Tactical Belt is a load-bearing tactical belt for attaching compatible pouches and field equipment. It uses nylon and weighs 145 g.

A split-front full-size chest rig made from Cordura® 500D and Nylon 210D laminate with fixed magazine storage. It adds flat inner pockets, body-armour interfaces, modular shoulder straps and comms routing.

The Skeletonized Cummerbund Slim by Direct Action is a slim and lightweight version of a cummerbund designed for plate carrier vests. The fastening is located on the front Velcro® panel of your plate carrier. By utilizing ROC® buckles with a width of 40 mm, you can avoid the need to open the front flap every time you put on or take off your vest. Nearly the entire surface is covered with a laser-cut modular system that is compatible with MOLLE/PALS.

SPITFIRE MK II Underpouch® adds a plate-carrier underpouch function to compatible modular equipment. The design uses Cordura 500D and proprietary laminate, with front loop panel and front MOLLE/PALS slots.

SPITFIRE MK II Plate Carrier uses a modular plate carrier layout for compatible plates and modular equipment. Materials include Cordura 500D/Nylon 210D laminate; notable details are scalable front flap/cummerbund/back-panel system and slick rear plate bag.

CORSAIR Low Profile Plate Carrier® uses a low-profile plate carrier layout for compatible plates and modular equipment. The design uses VersaStretch nylon: 93% nylon, 7% elastane, with fully elastic cummerbund with internal carbine/pistol magazine pockets and no external hook-and-loop panels.

MOSQUITO Y-Harness is a Y-style tactical harness for the modular MOSQUITO belt system. Materials include laminate/webbing construction; notable details are low-profile Y configuration and elastic back section.

The universal Guardian Chest Rig from Helikon is a platform that allows you to carry ammunition and equipment. It allows modular expansion thanks to compatibility with MOLLE / PALS on the bottom panel and the top of the pocket. The platform enables owner to use a belt and a backpack at the same time. Detachable, adjustable shoulder straps create a comfortable X-type carrying system.

The Skeletonized Comms Wings Set by Direct Action is a kit of two side panels designed specifically for plate carriers, intended for carrying most models of individual radio stations, including AN/PRC-148 and AN/PRC-152. These panels feature adjustable height, allowing for a perfect fit with various radio configurations, both with and without batteries.

SPITFIRE MK II Slick Carbine Mag Flap adds a slick carbine-magazine front flap function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate and elastic webbing, with three magazine sections and optional bungee retention anchor points and hook-and-loop slots.