Direct Action

Dump Pouch® is a foldable dump pouch for organised use within a modular load-bearing setup. Material choice centres on Cordura 500D and proprietary laminate; important details are reinforced collar and elastic/shockcord top retention.

For a front-mounted load, TYPHOON Chest Rig uses a modular chest rig layout for magazines and essential equipment. Material choice centres on Cordura 500D and Nylon 210D laminate; important details are large laser-cut MOLLE/PALS surface and four internal hook-and-loop pockets.

For modular equipment setups, Flashbang Pouch provides a flashbang pouch format. Materials include Cordura 500D/Nylon 210D laminate; notable details are elastic sides and internal safety-lever channel.

For modular equipment setups, Tourniquet Pouch® provides a covered tourniquet pouch format. The design uses Cordura 500D/Nylon 210D laminate, with hook-and-loop protective flap and TQ identification marking.

Horizontal medical pouch with a removable organised insert, quick-access zip and Hypalon® pull tabs. PALS and 45 mm belt mounting make the MK III easy to integrate with modular load-bearing equipment.

Designed for compatible modular systems, SPITFIRE Comms Wing Inserts functions as a plate-carrier radio wing. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are adjustable height and width and elastic side panels.

Padded two-point carbine sling that converts to single-point use. A 3 mm EVA/softshell neck pad, Hypalon® quick adjuster and front quick-release buckle improve comfort and handling with heavier firearms.

SPITFIRE MK II Backpack Panel serves as a zip-on backpack panel within a modular carrying setup. The design uses Cordura 500D and proprietary laminate, with zippered main compartment and flat front zip pocket.

Direct Action Vanguard Combat Shirt combines a Polartec® PowerDry FR torso with NYCO sleeves and Cordura® 500D elbow reinforcements. Zipped upper-arm pockets, adjustable cuffs and YKK® zips add practical storage and adjustment.

The Bearcat Ultralight Plate Carrier from Direct Action is an exceptionally lightweight and versatile tactical vest, designed with the modern battlefield in mind. Crafted from laser-cut Cordura and softshell material, this vest excels in saving grams, which is crucial in demanding conditions where you often need to wear it for hours or even days. It's worth emphasizing that every gram saved on your gear can translate into more ammunition, which is of utmost importance in tactical situations.

The Skeletonized Cummerbund Slim by Direct Action is a slim and lightweight version of a cummerbund designed for plate carrier vests. The fastening is located on the front Velcro® panel of your plate carrier. By utilizing ROC® buckles with a width of 40 mm, you can avoid the need to open the front flap every time you put on or take off your vest. Nearly the entire surface is covered with a laser-cut modular system that is compatible with MOLLE/PALS.

The Direct Action Skeletonized Triple 223 Flap is an advanced, skeletonized load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This innovative panel allows for carrying three magazines for M4/AR15 rifles. The magazines are secured with elastic bungee cord retainers, ensuring secure and quick access to ammunition. Thanks to its skeletal construction, the flap is not only minimalist but also one of the lightest options available on the market. It excels in situations where every gram of equipment matters.

The Direct Action Underpouch Light is a lightweight and versatile pouch made from durable Cordura® 500D material. This product is an excellent addition for every plate carrier. Designed with functionality in mind, it consists of three separate compartments. The main compartment is equipped with a sturdy zipper, ensuring secure storage. Its interior is lined with soft velcro, allowing for gentle storage and protection of valuable items.

HELLCAT Low Vis Plate Carrier® is a low-visibility plate carrier for compatible protective plates and modular equipment. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are elastic cummerbund with integrated pockets and front magazine flap and front.

Direct Action Simple Silencer Cover Short is a suppressor wrap designed for silencers 12 cm long and 40 mm in diameter. Its adjustable construction helps reduce the mirage effect caused by a heated suppressor.

Within a compatible modular setup, SPITFIRE Comfort Pad Set serves as a plate-carrier comfort pad set. The material base uses VersaStretch softshell and foam; key elements are six-piece set: two front and two rear.

Single-point elastic sling for compact shotguns, built from tubular webbing with an elastic core. MOLLE/PALS mounting, a 550 paracord loop and quick-release hardware keep the system compact.

Within a compatible modular setup, SPITFIRE® Assault Panel serves as a zip-on assault back panel. The material base uses Cordura 500D; key elements are three upper hook-and-loop pouches and large velour-lined zip cargo pouch.

Flashbang Pouch Open serves as an open-top flashbang pouch within a modular carrying setup. The material base uses Cordura 500D/Nylon 210D laminate; key elements are elastic body and adjustable height.

Direct Action Slick Dump Pouch combines lightweight nylon, proprietary laminate and elastic webbing in a low-profile folding design. A stiffened non-slip handle speeds deployment, while MOLLE/PALS and belt mounting provide two attachment options.

The Deployment Bag Large by Direct Action is a spacious tactical bag that allows for carrying up to 150 liters of equipment. Constructed from durable Cordura 500D, it features an adjustable, wide shoulder strap and a total of four handles, including two made from webbing sewn through the bottom, providing exceptional durability for carrying heavy loads.

The Skeletonized Comms Wings Set by Direct Action is a kit of two side panels designed specifically for plate carriers, intended for carrying most models of individual radio stations, including AN/PRC-148 and AN/PRC-152. These panels feature adjustable height, allowing for a perfect fit with various radio configurations, both with and without batteries.

The Skeletonized Triple 308 Flap from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This load-bearing panel is designed to carry three SR (.308WIN) magazines, securely held in place by elastic bungee cord straps. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

Direct Action Spitfire MK II Modular Cummerbund is a Cordura® laminate side panel for DA Hellcat and Spitfire plate carriers. Laser-cut MOLLE/PALS, hook-and-loop fastening and flexible nylon lining support modular attachment and adjustment.

The Skeletonized Shotgun Shell Flap from Direct Action is an advanced skeletonized panel with pouches designed specifically for BEARCAT vests and the SPITFIRE system. This flap allows you to carry three magazines for M4/A15 rifles and up to 15 shotgun shells. The top of the magazines is secured by elastic bungee cord straps. Thanks to its skeletal construction, this flap not only features a minimalist design but is also one of the lightest panels on the market.

Designed for compatible modular systems, MOSQUITO Drop Leg Panel functions as a high-ride drop-leg MOLLE panel. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are stiffened platform and MOLLE/PALS slots.

Direct Action Vanguard combat trousers combine NYCO fabric, 4-way stretch panels and Cordura® 500D knee reinforcements with pockets for protective inserts. Multiple pockets plus adjustment at the knees and cuffs provide storage and fit control.

The Direct Action Rope Bag is specifically designed for the safe storage of ropes during tactical operations, such as building interventions or helicopter insertions. The bag can accommodate up to 30 meters of individual rappelling rope. It is made from durable Cordura® 500D material and equipped with an adjustable shoulder strap, allowing it to be attached to a belt or rappelling harness for added stability.

Within the MOSQUITO belt system, MOSQUITO H-Harness provides a H-style tactical harness shoulder-support layout. Material choice centres on Cordura 500D and Nylon 210D laminate with mesh; important details are adjustable harness and reinforced drag handle.

Convertible two-point carbine sling with a softshell neck section and one-hand length adjustment. Paracord attachment loops and ITW Nexus® hardware support quiet, flexible carry.

SPITFIRE MK II Rapid Access Cummerbund adds a rapid-access plate-carrier cummerbund function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate, with ROC quick-release buckles and laser-cut MOLLE/PALS.

Extra-large Direct Action utility pouch made from Cordura® 500D laminate with a 4 × 4 PALS footprint and nearly twice the depth of the Large version. Internal elastic retention and bottom PALS slots support organised storage and modular attachment.

Low Profile Pistol Magazine Pouch is a low-profile pistol magazine pouch for organised use within a modular load-bearing setup. Material choice centres on Cordura 500D/Nylon 210D laminate and elastic webbing; important details are slim two-magazine format and integrated pull tabs.

CORSAIR Low Profile Plate Carrier® uses a low-profile plate carrier layout for compatible plates and modular equipment. The design uses VersaStretch nylon: 93% nylon, 7% elastane, with fully elastic cummerbund with internal carbine/pistol magazine pockets and no external hook-and-loop panels.

Direct Action Flashbang Pouch Mk II is a height-adjustable grenade pouch with a detachable flap and ITW QASM buckle. Its laminate body mounts to MOLLE/PALS or belts up to 45 mm wide, and the buckle can be removed for open-top access.

SPITFIRE MK II Slick Carbine Mag Flap adds a slick carbine-magazine front flap function to compatible modular equipment. The design uses Cordura 500D/Nylon 210D laminate and elastic webbing, with three magazine sections and optional bungee retention anchor points and hook-and-loop slots.

SPITFIRE MK II MOLLE Panel® is a zip-on MOLLE back panel for compatible modular load-bearing configurations. Materials include Cordura 500D/Nylon 210D laminate; notable details are laser-cut MOLLE/PALS surface and internal hydration/flat-item pocket.

SPITFIRE MK II Plate Carrier uses a modular plate carrier layout for compatible plates and modular equipment. Materials include Cordura 500D/Nylon 210D laminate; notable details are scalable front flap/cummerbund/back-panel system and slick rear plate bag.

Forearm-mounted GRG organiser for maps, notes and reference material. Adjustable elastic straps, a transparent pocket, pen loop and external loop/PALS surface keep frequently used information accessible.

Light Gloves are lightweight tactical gloves for field, range and equipment-handling tasks. Materials include polyester/nylon/elastane blend with synthetic leather palm; notable details are anti-slip palm and breathable stretch panels and touchscreen-compatible middle finger.

Within a compatible modular setup, SPITFIRE Triple Rifle Magazine Flap® serves as a triple rifle-magazine front flap. The material base uses proprietary laminate; key elements are three adjustable rifle-magazine pouches and Hypalon retention handles.

Short-cuff FR gloves combining DuPont Nomex® fabric with goat-leather palms. Reinforced fingers and knuckles, wrist adjustment and a hanging loop balance protection with precise hand movement.

The Flame Retardant Balaclava FR by Direct Action is a lightweight and breathable protective balaclava. Made from material that provides basic protection for the face and neck against brief contact with flames. The flexible material of the balaclava easily conforms to the user's face shape.

A Cordura® 500D messenger bag built around quick access and configurable organisation. Laser-cut MOLLE/PALS, a hook-and-loop-lined main compartment and a padded 13-inch laptop sleeve support everyday or field carry.

A 24.3 l tactical backpack with a compact egg-shaped profile, three organised storage zones and a ventilated carrying system. Cordura® 500D, laser-cut MOLLE/PALS and hydration support suit patrol, EDC and outdoor use.

For field and range work, Hard Gloves - Polyester Blend provide a tactical gloves design suited to handling equipment. Material choice centres on polyester/nylon/elastane blend with synthetic palm; important details are touchscreen-compatible thumb and middle finger and hook-and-loop wrist adjustment.

A 33.1-litre modular tactical backpack for multi-day loads, built from Cordura® 500D with a ventilated carrying system. It combines detachable organisation, hydration provision, padded computer storage and MOLLE/PALS expansion.

For a front-mounted load, THUNDERBOLT Compact Chest Rig uses a compact chest rig layout for magazines and essential equipment. Materials include Cordura 500D and Nylon 210D laminate; notable details are fixed carbine and pistol magazine pouches and zippered utility pocket.

Long-cuff FR gloves made from DuPont Nomex® with goat-leather palms. Reinforced fingers and knuckles plus an extended cuff provide added coverage while preserving dexterity.

Hard Gloves - Leather are tactical gloves for field, range and equipment-handling tasks. The design uses goat leather and textile panels, with touchscreen compatibility and hook-and-loop wrist adjustment.