Equipment

Emoji №28 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Emoji USA Men №1 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Emoji №26 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

USA Girl Emoji №2 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

MG Operator patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Cossack Ukraine patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

M-Tac Tiger Inner Belt for Range Belt is an accessory intended to work with a compatible tactical belt system. It uses Cordura 500D.

Drone Zone patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Swiatoslaw patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

MG Operator patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Face of War patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

Lucky Card patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

M-Tac Range Belt D-Ring Cobra Buckle Gen.IV is a load-bearing tactical belt for attaching compatible pouches and field equipment. The belt acts as a waist-borne platform, keeping compatible pouches and accessories distributed around the body.

Helm of Horror patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

Valkyrie patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

Paramedic patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

SORRY patch made from Oxford 190g/m², with hook-and-loop backing for compatible clothing, packs and equipment.

Decorative morale patch with a compact square design centered on the Helm of Horror, also known as Aegishjalmur; Cordura 500D construction, 45 x 45 mm format and hook-and-loop attachment.

Path of the Samurai patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Kitty patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

Multifunction outdoor watch with compass, altimeter, barometer, thermometer and 3D pedometer, housed in a polycarbonate case with 3 ATM water resistance.

A 97 g Cordura® 500D front panel for compatible Direct Action chest rigs, attached with top buckles and a zipper. A flat zippered pocket adds low-profile storage while the mesh inner surface sits against the rig.

Kitty Contour patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

Emoji №15 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

Helm of Terror Card patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.

The Drop Down Velcro Utility Pouch from Clawgear is a multifunctional organizer that can be mounted under a plate carrier using a fastener flap or directly on a belt thanks to the rear loops. The pouch is designed to facilitate convenient storage, providing easy access to its contents. It is equipped with multiple pockets, elastic tape organizers, and loops for various accessories such as multitools or light sticks.

SPITFIRE MK II Utility Back Panel® adds a zip-on utility back panel function to compatible modular equipment. The design uses Cordura 500D and proprietary laminate, with two large YKK-zip utility pouches and flat hydration compartment.

The Reaper Plate Carrier by Invader Gear is a lightweight and versatile ballistic plate carrier designed to provide users with comfortable and secure operation. Equipped with a full MOLLE system, it allows for carrying various types of equipment, making it perfect for special operations.

M-Tac Motorola 4400/4800 Radio Pouch is a radio pouch shaped around the compatible radio model stated in the product name. A model-specific radio pouch keeps the compatible handset in a separate carrier rather than loose in general storage.

The Reaper QRB Plate Carrier by Invader Gear is a lightweight and versatile low-profile carrier for ballistic plates, featuring a large area for carrying equipment thanks to the full MOLLE system. The vest is made using Laser Cut technology, which ensures durability with minimal material consumption.

M-Tac Hook-and-Loop Wallet Elite Gen.II Hex is a compact wallet for cards, documents and everyday essentials. It uses Cordura Hex 1000D and weighs 90 g.

Slovakia Flag Patch from Clawgear with Velcro fastening.

M-Tac Ergonomic Shoulder Pouch Elite is a modular utility pouch for organising small equipment on a compatible carry setup. It uses Cordura 500D, measures 13 × 6 × 3 cm and weighs 50 g.

M-Tac Universal Patch Panel is a compact equipment accessory with a clearly defined support function. It uses nylon 1000D, measures 35 × 50 cm and weighs 150 g.

Vortex Raptor is a field binocular offered in 8.5x32; 10x32. Coated optics and weather sealing support outdoor observation.

M-Tac Pepper Spray Holder Gen.II is a modular utility pouch for organising small equipment on a compatible carry setup. The utility-pouch format is intended for small equipment that benefits from a dedicated storage point.

M-Tac AK/AR Open Double Magazine Pouch Laser Cut is a magazine pouch designed to hold the magazine format stated for the model. A dedicated magazine pouch keeps the compatible magazine in its own carrier instead of mixing it with general cargo.

Vortex Recon R/T 15x50 is a compact monocular for one-eye field observation with 15x magnification and a 50 mm objective. The field of view includes the MRAD-based ranging reticle.

The 2-Way Tourniquet Pouch from Clawgear is designed for convenient carrying of a tourniquet. The pouch has a pass-through design, secured with Velcro flaps on both sides, which prevents the tourniquet from accidentally falling out while providing easy access in emergency situations. The mounting system is based on a single strap, allowing the pouch to be attached to any MOLLE platform on a belt, vest, or backpack.

The Bad Boy reflective sticker uses the skull-and-rabbit graphic as a compact way to personalize smooth surfaces. Its reflective character adds visual contrast, while the sticker format keeps application simple on everyday items.

Cig/Snus Pouch by Invader Gear is a versatile pouch for enthusiasts of both airsoft games and professionals alike. Equipped with a Velcro-closed flap and MOLLE attachment system, this pouch ensures secure storage and easy access to cigarettes or snus.

Sniper Bolero Leaf by Invader Gear is a minimalist camouflage netting designed to improve camouflage properties and reduce weight. This outer layer garment, typically worn over the uniform and equipment, is made of lightweight yet durable material in a camouflaging pattern.

3D PVC/rubber patch featuring a raised AR-15 motif in compact 3D form, with hook-and-loop backing for fast attachment to compatible gear.

3D PVC/rubber patch featuring a square raised medical-cross symbol for clear kit identification, with hook-and-loop backing for fast attachment to compatible gear.

Emoji USA Men №2 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

B Pos Bloodgroup Patch from Clawgear with Velcro fastening.

Emoji №21 patch made from PVC, with hook-and-loop backing for compatible clothing, packs and equipment.

AZ1 is a rip-away first-aid pouch with a MOLLE-compatible anchor panel, hook-and-loop attachment and an additional buckle strap. A grab handle lets the pouch be removed quickly with one hand while the anchor remains on the load-bearing platform.

Hook-and-loop M-Tac patch featuring a horizontal Valknut design suited to wider patch fields. Size 80 × 50 mm. Selected variants include glow-in-the-dark detail.

Spartan Helmet patch made from Cordura 500D, with hook-and-loop backing for compatible clothing, packs and equipment.