Equipment

The rectangular patch "Trust me I'm an engineer" by Helikon refers in a funny way to the subject of shooting. On a white background, there is the already mentioned gray inscription and the MP5 submachine gun with an inverted magazine. The ironic inscription "Trust me, I am an engineer" refers to this. The graphic with the inscription is surrounded by a thin blue line with the name of the Helikon-Tex company in the lower right corner.

The polyester Mini Med Kit by Helikon-Tex is a light, small personal first aid kit. The design is based on two internal mesh compartments fastened with YKK zippers. The pouch, after opening with a double zipper, unfolds like a wallet, allowing access to the interior. A wide strap handle and a small lanyard loop allow for convenient carrying or attaching to a carabiner. In addition, the small Mini Med Kit medical pouch has a velcro panel for identification on the outside.

The Radio Pouch by Helikon-Tex is an excellent solution for carrying radios. Communication equipment is a crucial part of the gear for both uniformed services and terrain explorers. Therefore, it's worth having it within reach at all times to be able to use it when needed.

A rigid 45 mm tactical gun belt with an AustriAlpin® Cobra buckle and reinforced anchor point. The loop-lined construction works on its own, with the MUSTANG Inner Belt or inside the MOSQUITO Modular Belt Sleeve.

A two-piece shoulder-pad set for Direct Action chest rigs, built from layered foam, mesh and softshell fabric. The pads attach directly to the suspenders to add a padded interface without changing the chest rig itself.

The Skeletonized Plate Carrier Flap by Direct Action is a minimalist load-bearing panel designed for BEARCAT® series plate carriers and the SPITFIRE® system. Thanks to its lightweight skeletal construction, it is one of the lightest flaps available on the market. The flap is equipped with a laser-cut modular system compatible with the MOLLE/PALS system.

The Skeletonized Triple Rifle Flap from Direct Action is an advanced skeletal flap designed for plate carriers from the BEARCAT® series and the SPITFIRE® system. With fully adjustable surface-mounted pockets, the flap allows for carrying three rifle magazines, including M4/AR15, AK, and SR models. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

Warwick Slick Chest Rig uses proprietary laminate with laser-cut MOLLE/PALS across its modular front. A flexible nylon inner layer, internal pockets for flat items and detachable shoulder straps create a low-profile configurable platform.

The Spitfire MK II Chest Rig Interface module by Direct Action enables the transformation of the DA Spitfire plate carrier into a lightweight chest rig while preserving some level of ballistic protection. The interface consists of harness straps and compact modular panels.

The Low Profile Dump Pouch® by Direct Action is an excellent solution for storing both empty magazines and a variety of items found during your missions. This flat and compact pouch is easy to attach to your belt and ready for immediate use. Inside the pouch, you can easily fit several rifle or pistol magazines, and even a full-sized handgun. Thanks to the reinforced, rubberized handle, using it is remarkably straightforward, even without the need to glance at the pouch.

Tourniquet Pouch Open is an open tourniquet pouch for organised use within a modular load-bearing setup. The material base uses Cordura 500D/Nylon 210D laminate; key elements are open-top access and TQ identification marking.

The ammunition container from Helikon-Tex made of durable Cordura® 500D material which is extremely resistant to all weather conditions. In addition, the ammunition container has a stiffened structure, which facilitates the packaging process. The inside of the container is lined with a fabric that absorbs dirt and is easy to clean. The container is closed by a solid two-speed lock, which protects the ammunition from accidental falling out.

A-10 Warthog Patch by Helikon-Tex is “BRRRT” you can wear – a striking morale patch featuring the iconic attack aircraft roaring in. The design references the A-10 Thunderbolt II (Warthog), an American aircraft built for close air support of ground forces. Introduced in the 1970s, the A-10 became famous for destroying tanks, armored vehicles, and other ground targets. The slogan “BRRRT” mimics the distinctive sound of the GAU-8/A cannon – a motif often seen in pop culture, symbolizing the firepower and legendary status of the Warthog.

The double Helikon-Tex magazine pouch is made of high-quality Military Grade Polymer in black color. It is a lightweight, yet durable and solid accessory even in difficult conditions. It is compatible with Glock 17, 19, 22, 23, 26, 27, 31-39 and similar magazines, as well as the Sig Pro P2022. The holding force of the magazines is fully adjustable using the Allen key included in the set.

Medium MOLLE/PALS-compatible utility pouch for organising general-purpose tactical equipment.

Double pouch for AK-pattern rifle magazines with MOLLE/PALS mounting and adjustable retention.

Double pouch for AR-pattern rifle magazines with MOLLE/PALS mounting and adjustable retention.

Compact fast pistol-magazine pouch from the Templar's Gear Fast Magazine family.

TG-H1 hydration back panel mounts to MOLLE-equipped tactical vests and carries a hydration bladder plus additional gear. A flat mesh pocket, shock-cord retention, drinking-tube outlet and adjustable bladder loop organise the main compartment.

TG-H3 hydration back panel mounts to MOLLE-equipped tactical vests and carries a hydration bladder plus additional gear. Its main compartment includes a flat mesh pocket with shock-cord retention for organising the bladder and spare equipment.

H-Harness designed for tactical belts with four attachment points, including the Templar's Gear PT1 and PT4.

Six-point tactical harness designed for PT3-style belt systems. The inner layer combines soft spacer mesh with thin padding.

Adjustable radio pouch for different personal-radio sizes. Depth and width can be tuned to the device, while a profiled top flap secures the radio in the pouch.

SFIP is a rigid medical pouch with fast side-zip access and a hook-and-loop closure operated by a laminate pull tab. Inside, a perforated insert and shock-cord loops organise medical equipment.

Lightweight shingle-style rifle magazine pouch with MOLLE/PALS-compatible mounting.

Second-generation shingle-style rifle magazine pouch with MOLLE/PALS-compatible mounting.

TPC Comfort Shoulder Pads use closed-cell foam covered with soft spacer mesh. The foam has minimal fluid absorption and improves thermal and carrying comfort when a plate carrier is fully loaded.

Set of four internal comfort pads for compatible TPC plate-carrier configurations.

TPC front panel configured for AK-pattern magazines as a modular plate-carrier accessory.

TPC front panel with three double rifle-magazine pouches for up to six AR-type magazines.

TPC Shingle front panel with three integrated rifle-magazine cells for a compact single-row loadout.

Adjustable MOLLE radio pouch for many PMR radios and similarly sized equipment, with polymer stiffening and elastic retention.

Smoke Grenade Pouch holds one smoke grenade in a lightweight MOLLE-compatible body. A quick-release flap and laminate lever-retention straps secure the load while keeping access direct.

Compact zippered MOLLE utility pouch for small equipment, with drainage and internal organisation pockets.

FB Flashbang Pouch carries one flashbang or stun grenade on MOLLE-compatible equipment. The lightweight Cordura/laminate body uses a quick-release flap and lever-retention straps for secure access.

Lightweight 10×5 laser-cut MOLLE chest-rig panel designed to combine with the ULPH harness for a modular load-bearing setup.

Medium MOLLE cargo pouch with double-zip access and a drainage opening for general-purpose tactical equipment.

FGP Fragmentation Grenade Pouch is sized for one fragmentation grenade and mounts via MOLLE. Its lightweight Cordura/laminate construction combines a quick-release flap with laminate lever-retention straps.

Padded, contoured tactical belt with a MOLLE attachment surface, inner-belt compatibility and harness attachment points.

Low-profile PT4 belt sleeve with laser-cut MOLLE, hook-and-loop inner surface and four reinforced harness loops.

Low-profile H-harness compatible with CR chest-rig panels, CPC front panels and PT-series tactical belts.

TPC Gen2 plate carrier set with laser-cut MOLLE surfaces, a removable front panel and an adjustable skeletal cummerbund.

Kangaroo-style front panel for compatible TPC plate carriers and modular front-load configurations.

Large MOLLE/PALS-compatible utility pouch providing extra capacity for general-purpose equipment.

Simple lightweight carbine sling for two-point carry with quick conversion to a single-point setup. Tubular webbing at the neck, a Hypalon® adjuster and paracord attachment keep the system compact.

The Guardian Law Enforcement Set by Helikon-Tex has been designed with the needs of the police and other uniformed services in mind. The central component of this set is the Guardian Plate Carrier tactical vest, which serves as the foundation for the other components. Included in the set are two modular Guardian Cummerband side belts, a front Guardian Kangaroo Flap panel, and an attachable Law Enforcement Insert panel with four pockets of various purposes.

The Double Horizontal Pouch from Helikon-Tex is a double magazine pouch, making it the perfect solution for both professionals and enthusiasts of tactical and defense shooting. With this pouch, you can securely carry magazines in a horizontal position, allowing for easy retrieval using both the right and left hand. The pouch is attached using a Velcro panel, and the circumference of the pocket can be adjusted using an elastic band.

The Guardian Cummerbund by Helikon-Tex is a set of two straps that allow for securing the front and rear sections of a vest. Thanks to its universal design, the product is compatible with other plate carriers. The Guardian Cummerbund serves the dual function of protecting and stabilizing both the front and rear of the plate carrier, while also enabling the attachment of accessories.

The Competition Med Kit by Helikon-Tex is an additional accessory dedicated to the COMPETITION Modular Belt Sleeve®. It is also compatible with MOLLE / PALS system. Thanks to the quick assembly, it allows for full customization of the set's equipment. This pouch is designed to carry a handheld first aid kit. It has an additional velcro panel for personalization.

The Chicom Chest Rig by Helikon-Tex is a simple and versatile chest rig with its roots dating back to the 1940s. It gained popularity during the Vietnam War. This comfortable and lightweight tool enables the carriage of essential equipment in confined spaces, such as urban environments or in CQB tactics. Its adaptability makes it ideal for tactical exercises, shooting training, and reconnaissance missions. The Chicom Chest Rig features a distinctive design with cut-off sides and three pockets sealed with hook and loop closures.