Tactical Gear

SPITFIRE Plate Carrier is a modular plate carrier for compatible protective plates and modular equipment. The material base uses Cordura 500D and proprietary laminate; key elements are laser-cut modular construction and quick-release system and front flap.

The Guardian Recce Chest Rig by Helikon-Tex is an advanced platform designed for reconnaissance operations and general green tactics. It is equipped with four buckle-closed pouches that can hold AK/AR type magazines. On the front, there is a large admin pocket lined with soft Velcro, allowing for interior customization using inserts from the VIS (Versatile Insert System).

The Guardian Law Enforcement Set by Helikon-Tex has been designed with the needs of the police and other uniformed services in mind. The central component of this set is the Guardian Plate Carrier tactical vest, which serves as the foundation for the other components. Included in the set are two modular Guardian Cummerband side belts, a front Guardian Kangaroo Flap panel, and an attachable Law Enforcement Insert panel with four pockets of various purposes.

Protective modular carrier for 250 × 300 mm hard plates and soft armor panels, with ROC quick release, laser-cut PALS and 3D-mesh comfort.

Integrated ballistic carrier for 25 × 30 cm hard plates plus front, rear and side soft armor, with ROC and Gen4-compatible placard interface.

The Skeletonized Cummerbund Wide by Direct Action is an extended version of a minimalist and lightweight cummerbund designed for plate carrier vests. It serves as an excellent companion for all Direct Action® platforms, including the BEARCAT® Ultralight Plate Carrier. This cummerbund is crafted from flexible nylon, allowing not only the carriage of flat items but also soft and hard ballistic protection.

Hybrid plate-carrier cummerbund with ROC quick release, elastic fit, laser-cut MOLLE and ventilation for TPC/CPC-compatible carriers.

Modular Gen 4 plate carrier for 25 × 30 cm plates with ROC quick release, laser-cut MOLLE, CoolMax padding and rear zip-panel interface.

Conversion harness that turns compatible CPC/TPC front panels into a stand-alone chest rig, with MOLLE side wings and CoolMax body-side panel.

A 97 g Cordura® 500D front panel for compatible Direct Action chest rigs, attached with top buckles and a zipper. A flat zippered pocket adds low-profile storage while the mesh inner surface sits against the rig.

Designed for compatible modular systems, SPITFIRE SMG Flap functions as a SMG magazine front flap. Material choice centres on proprietary laminate; important details are four adjustable SMG-magazine pouches and Hypalon retention pullers and laser-cut MOLLE/PALS front.

TEMPEST Chest Rig Vest is a split-front chest rig for front-mounted carriage of magazines and essential kit. The design uses Cordura 500D and Nylon 210D laminate, with two adjustable ammunition pouches for AR/AK/SR magazines and MOLLE/PALS surface.

Within the MOSQUITO belt system, MOSQUITO H-Harness provides a H-style tactical harness shoulder-support layout. Material choice centres on Cordura 500D and Nylon 210D laminate with mesh; important details are adjustable harness and reinforced drag handle.

HELLCAT Low Vis Plate Carrier® is a low-visibility plate carrier for compatible protective plates and modular equipment. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are elastic cummerbund with integrated pockets and front magazine flap and front.

Within a compatible modular setup, SPITFIRE® Assault Panel serves as a zip-on assault back panel. The material base uses Cordura 500D; key elements are three upper hook-and-loop pouches and large velour-lined zip cargo pouch.

Designed for compatible modular systems, MOSQUITO Drop Leg Panel functions as a high-ride drop-leg MOLLE panel. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are stiffened platform and MOLLE/PALS slots.

Designed for compatible modular systems, SPITFIRE Shotgun Shell Flap functions as a shotgun-shell front flap. Material choice centres on proprietary laminate; important details are three elastic shell columns and up to 21 standard 12GA shells.

Within a compatible modular setup, SPITFIRE Cutaway System® serves as a plate-carrier cutaway system. The material base uses polyester/webbing components; key elements are quick-release retrofit and field reassembly without cutting release elements.

A slim tactical belt sleeve for 45 mm belts with fixed elastic pouches for magazines, radio, first aid and tourniquet. Its stiffened low-profile laminate body also supports an inner belt and compatible OWB holsters.

Low-profile Gen 4 plate carrier for 25 × 30 cm plates with modular front panels, adjustable MOLLE cummerbund and zip-on rear interface.

For a front-mounted load, THUNDERBOLT Compact Chest Rig uses a compact chest rig layout for magazines and essential equipment. Materials include Cordura 500D and Nylon 210D laminate; notable details are fixed carbine and pistol magazine pouches and zippered utility pocket.

Designed for compatible modular systems, SPITFIRE Comms Wing Inserts functions as a plate-carrier radio wing. Material choice centres on Cordura 500D/Nylon 210D laminate; important details are adjustable height and width and elastic side panels.

A flat inner stabilising belt for Direct Action MUSTANG, WARHAWK and MOSQUITO systems. Its hook surface couples to loop-lined outer belts to reduce ride-up while keeping the waist area free from a second bulky buckle.

A profiled modular belt sleeve for gun belts up to 45 mm wide, with laser-cut MOLLE/PALS and a soft inner interface. Side holster slots, harness loops and compatibility with dedicated panels make it a flexible load platform.

A 45 mm waterborne tactical belt using an all-steel AustriAlpin® Cobra Nautic buckle for prolonged salty-environment exposure. Rigid webbing, loop lining and a reinforced anchor point complete the load-bearing construction.

A slim, rigid tactical belt made from proprietary laminate and heavy-duty tubular webbing. The AustriAlpin® Cobra buckle, reinforced anchor point and compatibility with Direct Action inner and sleeve systems support a stable equipment setup.

SPITFIRE MK II Modular Cummerbund Slim is a slim modular plate-carrier cummerbund for compatible modular load-bearing configurations. Materials include Cordura 500D and Nylon 210D laminate; notable details are single-layer construction and laser-cut MOLLE/PALS.

Designed for compatible modular systems, SPITFIRE MK II Elastic Cummerbund Slim Belt functions as a slim elastic plate-carrier cummerbund. Material choice centres on single-layer elastic webbing; important details are slick construction without side pouches.

The Tactical Hornet Skeletonized Belt Sleeve from Direct Action is an advanced platform designed for the comfortable transport of weapons, ammunition, and essential equipment. Its unique design is based on an innovative skeletal system, fully compatible with MOLLE/PALS, tailored to meet the latest needs in military conditions. In today's military reality, the importance of reducing equipment weight is unquestionable.

SPITFIRE MK II Utility Back Panel® adds a zip-on utility back panel function to compatible modular equipment. The design uses Cordura 500D and proprietary laminate, with two large YKK-zip utility pouches and flat hydration compartment.

MOSQUITO Hip Panel S is a small tactical belt hip panel for compatible modular load-bearing configurations. Materials include proprietary laminate; notable details are stiffened MOLLE/PALS mounting platform.

Direct Action Spitfire MK II Modular Cummerbund is a Cordura® laminate side panel for DA Hellcat and Spitfire plate carriers. Laser-cut MOLLE/PALS, hook-and-loop fastening and flexible nylon lining support modular attachment and adjustment.

Direct Action Spitfire Breacher Back Panel mounts to Spitfire vests or the Halifax backpack. It combines a velvet-lined cargo pocket, four stun-grenade pockets, side MOLLE/PALS columns and a flat hook-and-loop pocket for a hydration system.

Direct Action Warhawk Modular Belt uses a 45 mm webbing base with an AustriAlpin® Cobra D-Ring buckle and two rows for MOLLE/PALS accessories. Partial stiffening helps stabilise mounted pouches and holsters.

Within a compatible modular setup, SPITFIRE Comfort Pad Set serves as a plate-carrier comfort pad set. The material base uses VersaStretch softshell and foam; key elements are six-piece set: two front and two rear.

The Bearcat Ultralight Plate Carrier from Direct Action is an exceptionally lightweight and versatile tactical vest, designed with the modern battlefield in mind. Crafted from laser-cut Cordura and softshell material, this vest excels in saving grams, which is crucial in demanding conditions where you often need to wear it for hours or even days. It's worth emphasizing that every gram saved on your gear can translate into more ammunition, which is of utmost importance in tactical situations.

The Skeletonized Triple 308 Flap from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This load-bearing panel is designed to carry three SR (.308WIN) magazines, securely held in place by elastic bungee cord straps. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

The Skeletonized Quad SMG Flap Panel from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This flap panel has been designed for carrying four magazines for submachine guns such as MP5 and Scorpion Evo. The magazines are securely held in place by elastic bungee cord straps, allowing for quick access to ammunition.

A rigid 45 mm tactical gun belt with an AustriAlpin® Cobra buckle and reinforced anchor point. The loop-lined construction works on its own, with the MUSTANG Inner Belt or inside the MOSQUITO Modular Belt Sleeve.

A two-piece shoulder-pad set for Direct Action chest rigs, built from layered foam, mesh and softshell fabric. The pads attach directly to the suspenders to add a padded interface without changing the chest rig itself.

The Front Flap Rig Interface Harness by Direct Action is an innovative solution that allows for easy adaptation of any skeletal vest into a practical and lightweight chest rig. This complete kit includes not only the harness and waist belt but also features a flat pocket designed to cover the Velcro on the vest flap.

The Skeletonized Triple Rifle Flap from Direct Action is an advanced skeletal flap designed for plate carriers from the BEARCAT® series and the SPITFIRE® system. With fully adjustable surface-mounted pockets, the flap allows for carrying three rifle magazines, including M4/AR15, AK, and SR models. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

Warwick Slick Chest Rig uses proprietary laminate with laser-cut MOLLE/PALS across its modular front. A flexible nylon inner layer, internal pockets for flat items and detachable shoulder straps create a low-profile configurable platform.

The Spitfire MK II Chest Rig Interface module by Direct Action enables the transformation of the DA Spitfire plate carrier into a lightweight chest rig while preserving some level of ballistic protection. The interface consists of harness straps and compact modular panels.

TIGER MOTH Chest Rig provides a chest rig format that keeps magazines and essential equipment close to the torso. The material base uses proprietary laser-cut laminate, Cordura 500D and softshell; key elements are integrated adjustable rifle-magazine pouches and side PALS platforms.

SPITFIRE MK II Elastic Cummerbund adds an elastic plate-carrier cummerbund function to compatible modular equipment. The design uses 100 mm elastic webbing, with sectioned magazine pockets and laminate pull tabs.

SPITFIRE MOLLE Flap is a plate-carrier MOLLE flap for compatible modular load-bearing configurations. Materials include Cordura 500D and Nylon 210D laminate; notable details are laser-cut MOLLE/PALS front and quick configuration via dedicated flap ports or buckles.

SPITFIRE MK II Backpack Panel serves as a zip-on backpack panel within a modular carrying setup. The design uses Cordura 500D and proprietary laminate, with zippered main compartment and flat front zip pocket.

H-Harness designed for tactical belts with four attachment points, including the Templar's Gear PT1 and PT4.

Six-point tactical harness designed for PT3-style belt systems. The inner layer combines soft spacer mesh with thin padding.