Manufacturers

Smoke Grenade Pouch holds one smoke grenade in a lightweight MOLLE-compatible body. A quick-release flap and laminate lever-retention straps secure the load while keeping access direct.

Lightweight 10×5 laser-cut MOLLE chest-rig panel designed to combine with the ULPH harness for a modular load-bearing setup.

FGP Fragmentation Grenade Pouch is sized for one fragmentation grenade and mounts via MOLLE. Its lightweight Cordura/laminate construction combines a quick-release flap with laminate lever-retention straps.

Medium MOLLE cargo pouch with double-zip access and a drainage opening for general-purpose tactical equipment.

Padded MOLLE tactical belt sleeve for inner belts up to 50 mm, with four harness attachment points and replaceable padding.

Padded, contoured tactical belt with a MOLLE attachment surface, inner-belt compatibility and harness attachment points.

TPC Gen2 plate carrier set with laser-cut MOLLE surfaces, a removable front panel and an adjustable skeletal cummerbund.

Adjustable MOLLE radio pouch for many PMR radios and similarly sized equipment, with polymer stiffening and elastic retention.

Adjustable radio pouch for different personal-radio sizes. Depth and width can be tuned to the device, while a profiled top flap secures the radio in the pouch.

SFIP is a rigid medical pouch with fast side-zip access and a hook-and-loop closure operated by a laminate pull tab. Inside, a perforated insert and shock-cord loops organise medical equipment.

TPC Comfort Shoulder Pads use closed-cell foam covered with soft spacer mesh. The foam has minimal fluid absorption and improves thermal and carrying comfort when a plate carrier is fully loaded.

FB Flashbang Pouch carries one flashbang or stun grenade on MOLLE-compatible equipment. The lightweight Cordura/laminate body uses a quick-release flap and lever-retention straps for secure access.

Four-point tactical belt harness that distributes load across the shoulders and adds laser-cut MOLLE mounting space.

Hard Gloves - Leather are tactical gloves for field, range and equipment-handling tasks. The design uses goat leather and textile panels, with touchscreen compatibility and hook-and-loop wrist adjustment.

HK SFP OWB No Light Holster is designed for outside-the-waistband carry of the compatible pistol platform. The material base uses Kydex; key elements are pancake-style low-profile construction.

Warwick Slick Chest Rig uses proprietary laminate with laser-cut MOLLE/PALS across its modular front. A flexible nylon inner layer, internal pockets for flat items and detachable shoulder straps create a low-profile configurable platform.

Compact Warwick Mini Chest Rig made from Cordura® 500D laminate with laser-cut MOLLE/PALS slots and a flexible nylon inner layer. Internal pockets for flat items and quick-detach shoulder straps add organisation and configurable carry.

The Spitfire MK II Chest Rig Interface module by Direct Action enables the transformation of the DA Spitfire plate carrier into a lightweight chest rig while preserving some level of ballistic protection. The interface consists of harness straps and compact modular panels.

Low-profile carbine magazine pouch designed for discreet belt carry. Elastic construction, a semi-rigid laminate section and a 45 mm belt interface keep the pouch flat while allowing fast magazine access.

Direct Action Spitfire Breacher Back Panel mounts to Spitfire vests or the Halifax backpack. It combines a velvet-lined cargo pocket, four stun-grenade pockets, side MOLLE/PALS columns and a flat hook-and-loop pocket for a hydration system.

Single-point elastic sling for compact shotguns, built from tubular webbing with an elastic core. MOLLE/PALS mounting, a 550 paracord loop and quick-release hardware keep the system compact.

40-litre Halifax Medium patrol backpack built from Cordura® 500D laminate. A loop-lined main compartment, laser-cut PALS/MOLLE and a load-bearing harness allow extensive internal and external configuration.

The GO LOUD! 80s Style Trucker Cap by Direct Action is a modern take on classic trucker caps. Thanks to its synthetic mesh panels, this cap is perfect for hot summer days. It's an excellent addition to your wardrobe, suitable for everyday wear as well as outdoor adventures or visits to the shooting range.

The Neck Gaiter FR from Direct Action is a simple yet incredibly versatile accessory that will excel in various situations. It not only provides effective protection for the neck and face against brief exposure to fire, dust, or wind but also serves several other functions. In a matter of seconds, it can be transformed into a hat, scarf, headband, or goggle shield.

The Skeletonized Triple 308 Flap from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This load-bearing panel is designed to carry three SR (.308WIN) magazines, securely held in place by elastic bungee cord straps. Thanks to its skeletal construction, the flap not only boasts a minimalist design but is also one of the lightest solutions available on the market.

The Direct Action Skeletonized Triple 223 Flap is an advanced, skeletonized load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This innovative panel allows for carrying three magazines for M4/AR15 rifles. The magazines are secured with elastic bungee cord retainers, ensuring secure and quick access to ammunition. Thanks to its skeletal construction, the flap is not only minimalist but also one of the lightest options available on the market. It excels in situations where every gram of equipment matters.

The Skeletonized Quad SMG Flap Panel from Direct Action is an advanced, skeletal load-bearing panel designed specifically for BEARCAT vests and the SPITFIRE system. This flap panel has been designed for carrying four magazines for submachine guns such as MP5 and Scorpion Evo. The magazines are securely held in place by elastic bungee cord straps, allowing for quick access to ammunition.

A rigid 45 mm tactical gun belt with an AustriAlpin® Cobra buckle and reinforced anchor point. The loop-lined construction works on its own, with the MUSTANG Inner Belt or inside the MOSQUITO Modular Belt Sleeve.

A two-piece shoulder-pad set for Direct Action chest rigs, built from layered foam, mesh and softshell fabric. The pads attach directly to the suspenders to add a padded interface without changing the chest rig itself.

A lightweight flame-retardant neck gaiter made from breathable stretch fabric with flat seams. The tubular form can cover the neck or face and can also be arranged as a cap, scarf, headband or goggle cover.

A lightweight flame-retardant balaclava covering the face and neck, made from breathable stretch fabric with flat seams. Its close fit works with most helmet liners as well as ballistic goggles and glasses.

A lightweight flame-retardant beanie for standalone use or wearing under a helmet. Breathable stretch fabric, flat seams and a 26 g weight keep this older Combat Dry / CDR version compact and close-fitting.

Lightweight shingle-style rifle magazine pouch with MOLLE/PALS-compatible mounting.

Second-generation shingle-style rifle magazine pouch with MOLLE/PALS-compatible mounting.

Set of four internal comfort pads for compatible TPC plate-carrier configurations.

TPC front panel with three double rifle-magazine pouches for up to six AR-type magazines.

TPC Shingle front panel with three integrated rifle-magazine cells for a compact single-row loadout.

Kangaroo-style front panel for compatible TPC plate carriers and modular front-load configurations.

25-litre tactical daypack with laser-cut MOLLE surfaces, hydration/laptop compartment and a wide-opening main compartment.

Compact zippered MOLLE utility pouch for small equipment, with drainage and internal organisation pockets.

Large MOLLE/PALS-compatible utility pouch providing extra capacity for general-purpose equipment.

Padded and stiffened MOLLE tactical belt designed as a stable first-line platform for pouches, holsters and compatible harnesses.

Low-profile PT4 belt sleeve with laser-cut MOLLE, hook-and-loop inner surface and four reinforced harness loops.

Low-profile H-harness compatible with CR chest-rig panels, CPC front panels and PT-series tactical belts.

Direct Action Simple Silencer Cover Short is a suppressor wrap designed for silencers 12 cm long and 40 mm in diameter. Its adjustable construction helps reduce the mirage effect caused by a heated suppressor.

The Front Flap Rig Interface Harness by Direct Action is an innovative solution that allows for easy adaptation of any skeletal vest into a practical and lightweight chest rig. This complete kit includes not only the harness and waist belt but also features a flat pocket designed to cover the Velcro on the vest flap.

Mil-Spec Monkey Uzis Floozies Jacuzzis PVC Morale Patch is a morale patch by Mil-Spec Monkey with hook backing for compatible loop panels. Retro design inspired by a 1985 Soldier of Fortune convention pin, with a stylised graphic treatment by Joshua Johnson. It measures approximately 3.75 x 2.65 in (9.5 x 6.7 cm) and can be mounted on compatible clothing, packs and equipment.

Mil-Spec Monkey US Flag PVC Flag Patch is a flag patch by Mil-Spec Monkey with a sewn-on hook backing for compatible loop panels. United States flag in matte PVC with slightly rounded corners to reduce snagging. It measures approximately 3.4 x 2 in (8.6 x 5.1 cm) and can be moved between compatible clothing, packs and equipment.

Mil-Spec Monkey Stupid Allergy Morale Patch is a morale patch by Mil-Spec Monkey with a sewn-on hook backing for compatible loop panels. A medical-style joke patch about having a low tolerance for 'stupid'; the manufacturer explicitly says it is not intended for real allergy identification. It measures approximately 2 x 1 in (5.1 x 2.5 cm) and can be moved between compatible clothing, packs and equipment.

Mil-Spec Monkey Winning Morale Patch is a morale patch by Mil-Spec Monkey with a sewn-on hook backing for compatible loop panels. Simple humorous text patch for signalling that things are going well. It measures approximately 3 x 1 in (7.6 x 2.5 cm) and can be moved between compatible clothing, packs and equipment.